Saturn V SIC Hold down structure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the hold down structure in the SIC stage that the hold down arms clamped onto prior to launch.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
The Saturn V model that accompanies Farscape1's LUT is missing this detail. With it missing the hold down arm clamps are retracted. Not essential but a detail I thought should be added. They fit to the bottom of the heat shield and along the vertical line of the white/black paint scheme on the booster. The dimensional data came from a drawing that David Weeks did on the Saturn V.
Both the arms in Farscape1's and bglasford1's models of the LUT will fit though Farscape1's is tight. The pic show a structure installed, the other shows the white one printed in PLA and the grey one in resin. This is 1/72 scale to fit my Saturn V, to fit the original model use 1.2 in the scale tool.
They were printed on a Creality K1 and a Creality Halot Mage