Nürburgring Track Wall Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nürburgring Logo Wall Piece (760MM x 760MM)
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey racers!
This is the Nürburgring Logo that I've designed into a large wall piece for any flat surface on a wall. This project should consist of two colors, RED for the Nürburgring Letters and BLACK for the Track. It was a blast to design this and I hope you enjoy assembling this too!
SIZE: ≈ 30 x 30 Inches
- NOTE: This is a large wall piece that must be printed in MULTIPLE pieces…
Materials:
- ALL PRINTED PARTS
- SUPERGLUE
- DOUBLE SIDED TAPE
INSTRUCTIONS:
1.Print ALL of the Parts in each folder below.
2. Follow the Instruction Assembly Slideshow to line up every part.
3. Super Glue the three pieces of the larger track together.
4. Use double sided Sticky tape to attach everything to your wall:)
Settings:
- Supports: No
- Resolution: 0.2 mm
- Infill: at least 5%
- Filament material: PLA (preferred)
- Filament brand: Any
- Filament color: Red, Black (Best Aesthetic Look)
- If you enjoyed this print, give it a like! I'd really appreciate it:)