Wyniki wyszukiwania: stuff

Pussy Stuffer Dildo

For the lady that likes a lil extra..approx 250mm long,69.5mm at its thickest.Please feel free to rate and review.

Command Strip Backpack Hook (or other stuff)

Wanted a Hook to hang my empty backpack on at work. Didn't want to put a hole in the wall. Thought I'd try to use 3M command strips. Wasn't sure if it would be strong enough, but so far, so good.

Fossils Stuff Revo 5 CADDX FPV Camera Mount

Designed to interface the camera mount that comes with the CADDX Ratel 2 with the base plate of the Fossils Stuff Revo 5 frame. You will need: 2x M2 x 4mm heat-set insert 1x M3 x 4mm heat-set insert 2x M2 screw 1x M3 screw

PhoenixDoesStuff Key-Chain

Basic Key-Chain That You Can Hang On Your Walls, In The Halls, Or On Your Bal- (Based Off Of The PhoenixDoesStuff YT Channel.)

Stuff

Stuff

Plates with rulers AND grooves to lock stuff

Some stuff I have to put on the plates must be hold by something. The holder will help lock them into place. You WILL need to print your own locking tool that will go into the holder, obviously, since your needs will probably be very…

Phoenix Plastic stuff

beyblade

Hammock phone holder / stuff presenter

Let your phone or stuff relax :) Printing Printed in PETG / 0.3 layer height PLA should work too (mat part needs proper bed adhesion) Print parts in given orientation Don't use supports or brim Assembly Also check out the corresponding…

PG29 Blind Stuffing-Adapter to 1xPG7+1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG7+1xPG9-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

guitar stuff

3d guitar stuff

PG42 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…

HSW modular stuff holder/basket/bucket, lattice-aligned

description Those are holders for HSW. They are lattice-aligned, meaning that they use the distances between HSW's hexagon centers as width and height. Therefore, there is no distance, or regular distance, between each holder. This is…

Disposal Refuse Stuffer

valentines theme stuff

dont gift it for your own safety

Stuffed Turkey

A cute turkey eating a slice of pie.

Magnetic Valentines Candy Heart Jewelry/Gift/Stuff Box

This is a magnetic gift box for all your valentines day needs! Comes with 19 lid options! You can use it for jewelry or chocolate or any other such things! Takes 12 6x3 magnets (link at the bottom). Super glue them in for best results.…

Mountain Bike Stuff

Star wars Tattoine towers and stuff

When it asks to scale to millimetres say No in orca slicer When it asks to print multiple parts as one click YES It is 40 grams: 10% infill No supports needed

Cable organizer/management stuff

gave myself exactly about 2 hours on this, really proud on how it went judging by how this is my first time using fusion! if youve got some cables and need some (rather interesting) cable holder designs and a 3d printer, this may or may…

GREAT STUFF PRO - PRO 14 Foam Dispensing Gun Tip

The applicator tips are perfect for use in those tough to reach areas

arabic stuff

...

Bottle (and stuff) hanger for a 30x30mm profile

A simple hook for bottles & other stuff for your basement. PLA Comfortably holds 1kg. I have a 30x30mm aluminum profile in my basement from which I now can hang stuff. Print with PLA/PETG 3 walls, 20% gyroid infill, tree supports.

Box Insert for Tokens and Stuff (BITS): 315mm Internal

I am moving board game miniatures onto shelves and so am consolidating each game and all of its expansions into a single box. To do this, I've created this generic box insert system, BITS, the Box Insert for Tokens and Stuff! This BITS is…

Box Insert for Tokens and Stuff (BITS): 284mm Internal

Here are the core BITS Components for board games with 284mm boxes, such as Steamforged Games's Horizon: Zero Dawn series! Below is the same text as I used for the 315mm boxes, so if you've already read that, feel free to stop here ;) The…

Sausage stuffer nozzle

Designed for stuffing 22 mm sausage casings. Compatible with most generic/manual sausage stuffers (AliExpress type). Reinforced cone design to prevent cracking at the weakest point. Printed with 100% infill for strength. Recommended print…

Light rack for Light stuff - OpenGrid version

A small rack for light weight stuff like rolls of tape. Don't try it with anything heavy. Thanks to David D for the OpenGrid system I used PLA, it needed 48 grams, and took about one and a half hours to print on a BBL A1

shark couch drink and stuff holder

when ever u are watching a scary shark movie print this model

Random toys and stuff!

Here are some random stuff that I created just for the sake of learning! 1. Infinity cube: I always wanted to learn how the infinity cube is modelled. So, I started to model it from references available online and here we are! Printing…

Big Blub of Random Stuff

Big blub of random stuff. What can I say more?

Cup for holding stuff

This is simple cup I designed to hold my toothbrush. You could use it to hold lots of stuff. It is a very basic cup. I printed in Overture Matte Gray PLA with all default print options. Printed in about 1:50 on a MK4S.

a plate of random stuff i need to print

random stuff stick caps for my rc plane and stuff to fix my prop launcher

Boxes for stuff

Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…

Pen-box (holder) for pencils and other stuff

A pen box I made as one of my very first projects for my workshop. Just throw your pencils in it (to what else....) Should be printable without supports. If you feel fancy, I added the letters, so you can print them in an accent color and…

Gridfinity 25 Bin Box For Stuff Version 2.3 6U, 9U and 12U deep options (UNTESTED REMIX)

THIS IS UNTESTED - PRINT AT YOUR OWN RISK (but please provide feedback if you do). Version 2.4 (2/20/2025) small update to fix incorrect plate descriptions in the 3mf profile. The current profile is…

kitchen stuff holder

to hold stuff

Basket for stuff

this is a basket

Gridfinity 1x2, 3, 4, 5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0

These are the latest version (v 2.0) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…

Gridfinity 2x2, 3, 4, 5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.2

These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…

Gridfinity 3x3 3x4 3x5 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.2

These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…

Gridfinity 4x4 and 4x5 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.2

These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…

Zen Vaporizer magazine funnel and stuffer

This is a Zen Vaporizer Capsule Magazine funnel and stuffer. With this tool you can fill all 5 capsules of the magazine at ones. There is also a funnel for a single capsule and a small stuffer tool. Print Option: Bambu Lab PLA 15% Infill…

Radio-Stuff Common Mode Choke Case

I purchased a premade Common mode choke from Radio Stuff so created a case to protect it from damage when in my rucksack. The case required cut outs to accomodate the coax. The lid then clamps down on the coax to lock in place. These…

A box for router bits or other stuff

To be used over grid 50x50mm variants with my tools description and empty box modifiable in slicer

Minibox for stuff

Layer height should be at least 0,15 mm or less. The example in the pictures is printed with a 0,08 mm layer height.

Super Action Stuff Footpegs and Stilleto Pegs for the Ultimate Weapons Rack

If you own the Super Action Stuff Ultimate Weapons Rack available here: https://a.co/d/6nbEmnT These minimalist pegs allow you to stand and display your figures on the pegboard side of the rack. No more large figure stands taking up…

Modular (Customizable) Inserts for the MINI Box For Stuff v1.3 (fits A1 MINI / Prusa Mini size printers)

This is a customizable insert for the MINI Box For Stuff v1.3 (fits A1 MINI / Prusa Mini size printers). These models are blank, and REQUIRE customization. This is being posted so that folks can customize the insert modules for the MINI…

TINY TUBS - Tiny tubs for tiny stuff!

TINY TUBS Tiny tubs for Tiny Stuff! A set of tubs, wall mountable or free standing. Each tub slides easily in and out of the holder and has a clip on lid, the standard tub is 40mm x 40mm x 40mm and the Taller tub is 40mm x 40mm x 85mm.…

stuff

svsh

Under-shelf foil / rolled kitchen stuff holder

I've been on an organizing kick lately in my kitchen, and I ran across an under-shelf cling-wrap box holder. But, I didn't much care for it. It printed tall--very tall-- so it takes a bit longer, since printing along the z-axis is slower…

Modular Ball Mount for Antennas & Other Stuff

This mount is designed to be adapted to lots of different things, so I have included the F3D file, AND STEPs. It's original use is for this antenna: https://a.co/d/g9km0ca I used ¼" carriage bolts for the antenna mount and 5/32 bolts for…

I'M ALWAYS FORCED TO DO STUFF I'M NOT... sign

Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…

Soldering iron stand (for a stuff)

Print this stand for order your working place. I use FNIRSI HS-01 soldering iron and additional stuff. Print Settings Printer Brand: Creality Printer: Ender-3 V3 SE **Rafts:** No Supports: No **Infill:** 10 Filament: Noname PETG Black…

GP Gridfinity Stuff

The shapes are fully compatible with gridfinity. When it comes to magnets and screws I changed two things: - I used TAPERED M3x5mm screws. They are shorter and the holes are self-supported. - I used 6x1mm magnets, the are twice cheaper…

Surface mount 20mm cutout templates conduit and stuffing gland

I designed these to do a workshop re wire that required the use of plastic back boxes along a benched workspaces. A lot of back boxes of this type do not have 20mm knock outs in them and as I also like to use 20 mm nut and flange fittings…

Hot Stuff

I printed with my Ender 3 The print settings is: No support 0.2 layerheight and the text looks downű Thank you for looking at this model!

Shower rail stuff

I liked the hook from my shower rail holder https://www.thingiverse.com/thing:3650248 so I made some more holders in order to store shampoo, liquid soap and similar stuff at the rail. I will add more stuff in some moment. I suggest to use…

Filament Box Structure Backbone for Storing Stuff

I found the boxes that come with the filament to be very useful to organize my workshop. I have a box for AC electrical, a box for DC electrical. Arduino, Acrylic painting, Silicon tooling, Epoxy tooling, sewing, etc. I like the boxes…

Dowel Pins For Vault by Rocco's Stuff

I was making the vault, and when I went to buy the dowel pins, I decided to just design them myself, and thought others might want to as well. So here they are. The Link to the Original vault by Rocco's stuff is here:…

Badger Badger Badger - MrWeebl / Weebl's Stuff

Snake: https://www.printables.com/model/1054719-oh-its-a-snake-mrweebl-weebls-stuff-badger-badger Mushroom: https://www.printables.com/model/1208960-mushroom-mushroom-mrweebl-weebls-stuff

Oh, it's a snake - MrWeebl / Weebl's Stuff (Badger Badger)

Badger: https://www.printables.com/model/1054537-badger-badger-badger-mrweebl-weebls-stuff Mushroom: https://www.printables.com/model/1208960-mushroom-mushroom-mrweebl-weebls-stuff

a54 case remix thicker with pocket for stuff

case

Legs for stuff

Legs for putting on stuff

2x2 GridFinity - Rotative Zip Ties And Stuff Holder

Bored of static Gridfinity bin that are anything but dynamic ? Try this turning holder if you want it more ludic. Here it is. The 2x2 GridFinity - Rotative Zip Ties And Stuff Holder Bring back the fun in the workshop. Be the party of the…

Snowman pen and stuff holder - opened top

It's 130mm tall so quite large.

Fat Grip / Weight Lifting Bar Stuff Thingy

28mm Weight lifting bar plug. 57mm to train your grip. works well. 15% infill 2 walls 0.2mm is tough enough to lift 60kg(I haven't check more weight) thanks. Category: Sport & Outdoors

Rocco's Stuff vault box variation

Hello everyone I would like to suggest some modifications to the excellent work of Rocco's Stuff Mini Vault. I enlarged the trunk to make it deeper. I added a shelf and a tunnel to use it as a piggy bank. I also prepared all the 3MF and…

Candy Cane Lane - Tic Tac Toe Board - Games, Stocking Stuffers, Car Games, Decor

We have so much fun playing tic tac toe in our house, that we decided to make a board for every season. For the holiday season this year, we are playing with candy canes! Print 5x Xs and 5x Hearts. One board. Utilize filament changes to…

Wasp pencils & stuff nest

The hexagonal holders are separated into 4 parts that need to be glued: top, middletop, middle bottom and bottom. The stand is also separated into 2 parts, left and right side that once glued just need to be pushed into the hexagons.

Hakka Stuffer 1/2" drive adapter

I had trouble getting enough force on my Hakka sausage stuffer handle to stuff 17mm snack stick casings through a 10mm tube, so I made this adapter to allow a longer handle (in my case a ratchet handle) to be attached to the stuffer to…

Teeth Cup by DaveMakesStuff

For all awesome photos, makes, reviews and more visit original source links. DaveMakesStuff description on thangs.com: “Hey, if you’re in the neighbourhood drop by for a… CUP OF TEETH!!!! WHOA HA HA HA!” Teeth cup and saucer are linked in…

vase that is cool and stuff

this is a vase yeah

Swoopy display shelf for miniatures and stuff

Hey everyone! Today I bring you a nice little display shelf. It prints fairly fast and easy. It has a clearance of about 70mm between shelves but if the things you are putting on it are small it can still fit a lot, giving you more room…

Custom Keys for Rocco's Stuff Locks

Custom keys based off the pins in the original model. The key names indicate the lock lever order. The original key is 321 stacking the lock levers from the top 3 to the bottom 1. Note that the keys with duplicate numbers will require you…

Parametric section box, storage for resistors and other stuff (FreeCAD)

Initially the box was designed to sort out resistors, but I decided to make it parametric, so you can modify it easily to store any kinds of little things. The default size has 10 sections, each section can store 20 resistors. 3 boxes are…

drawer for small stuff

drawer

Pussy Stuffer Dildo

For the lady that likes a lil extra..approx 250mm long,69.5mm at its thickest.Please feel free to rate and review.

Christmas stuff

This is christmas accessories. No supports needed.

Stuff Holder

Its a holder that you put stuff in

Nanoxia Case Update Stuff

Habe mir zu meinem neuen Nanoxia Deep Silent A-RPG Gehäuse ein paar dinge Gedruckt die das Leben schöner machen. Headsethalter: Einfach zu Drucken mit leichtem Support im unteren Bereich, siehe Bild, kann einfach in die vorderen…

Stick hook for getting stuff from under the sofa. (actually useful)

Stick hook for getting stuff from under the sofa. A hook that you attach to a stick. It helps get stuff from under the sofa. Printing: I printed it from PLA. I used 3 perimeters and 20% infill but you can try less. Don't use supports.…

Remix: Case insert for Infiray P2 Pro by mikeselectricstuff, With clearance for larger 90 deg USB C connector

I wanted to use a female - female duttek 90 deg connector as I'll have an extra from the gopro P2 Pro case.

mount for mini stuff organizer

this id for this box https://www.thingiverse.com/thing:4908289/files 100% infill add suports Category: DIY

Harbor Freight Yukon attachment to hang a heat gun/misc. stuff

Needed a hanger to hold the heat gun without storing it away. it uses the bolt holes for the handle on the right side.

Fossils Stuff Revo 5 16mm Motor Mount

A motor mount for the Fossils Stuff Revo 5 frame to enable mounting of motors that have 16mm centre-to-centre mounting holes. I printed mine vertically (as pictured) and they have been holding up well so far. You will need M3 x 4mm…

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…

Just some stuff I made or reengineered to work for me

The ESC Mounts I made and the sliding battery tray I modified to work for my application. The esc mount is for a SonicWake 36 V2. You will use it as a template to use to cut a 2mm thick carbon fiber plate and then mount it to your boat…

battery stuff

use this if you want to be nice/ frends wif mr bean

Modern towel holder wall mount for holding towels or other stuff to the wall or cabinets

Towel holder for holding towels or other stuff to the wall or cabinets. place two strips of double sided tape to the back and enjoy your towel holder in the bathroom, kitchen or toilet! Can even hang scheur calendars!

Basic tray for basic stuff

Basic tray for basic stuff

Mini bedside storage box for smartphones and other stuff

Mini bedside storage box for your smartphone and other stuff. I added a hole on the floor to put your charging cable through, when not used you can put it in the small slid at the side to prevent it from sliding out. I included several…

Bunch of Random Stuff

bunch of stuff i made

Stuffed Fables proxy models

Modeled figures for the board game Stuffed Fables, Stuffed Fables. Made in blender, taking as a model the images from the internet, so they are not scanned. more than 100 hours of work to give life to the game, or to replace any missing…

Firgo Bottle Holder's Stuff - WHIRLPOOL

Bottle holder support compatible with the Whirlpool refrigerator model "No Frost Space 400". It is useful for housing the metal tube which otherwise would not have an adequate support surface. I was able to see that it is compatible with…

IR Blinx logo stuff

3D printer logos and maker coins

EXTREMLY basic stuff holder

holds pens, pencils, or anything for that matter.

Kitchen box / organizer for baking stuff - 4 small pockets

This is a small Kitchen box / organizer for baking ingredients in one row. Size of the pockets (4x): 65:40 mm Many thanks to Purrfect3D for creating the original model…

Kitchen box / organizer for baking stuff - 2 pockets

This is a small Kitchen box / organizer for baking ingredients in one row. Size of the pockets (2x): 81,5:68 mm Many thanks to Purrfect3D for creating the original model…

LEM Sausage Stuffer Adapter

LEM Sausage Stuffer adapter adapts a 15# sausage stuffer to a LEM patty maker.

Kitchen Stuff organizer/ Box/ insert

A box perfectly fitting next to an Ikea cutleryinsert into an Ikea Billy. There is also an stl without the text. Size: 25cm x 10cm x 3,5cm

Motorize Your Sausage Stuffer

These are the parts necessary to motorize your 15lb hakka manual sausage stuffer. See the YouTube video linked below for detailed instructions.