Shelf Pusher for Filament Boxes (and all the other stuff as well)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple shelf pusher that is driven by rubberbands.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
You got a lot of filament to store, but your shelf is in an inconvenient height?
......and then you have to get on your knees and climb into that shelf, just to reach the last box, that's gotten shoved back there somehow?
....AND THEN, you find yourself in Narnia, doing odd-jobs for some talking Lion? (The Lion was kinda chill ngl)
Well if you'd like to avoid all this trouble, I've got the THING for YOU!
I've made a simple shelf pusher that will automatically push all stored goods to the front.
Just like in a Super Market-Shelf.
Use it or adapt it, however you like.

Parts List:
4x M3x25mm Socket Head Bolt
4x M3 Nut
2x 10mm pipe of your chosen lenght
(PVC/Alu/Steel recommended)
1x Rubberband of your choice
I recommend to print everthing in PETG or PLA. With a layer height of 0.2mm
Clamps & Bolt Covers:
Perimeters: 4
Infill: 70%
No supports needed.
Everything else:
Perimeters: 4
Infill: 15%-20%
No supports needed.
All models are already oriented for optimal printing.








