1 / 4
S-hook with a load capacity of 10 kg — zdjęcie 1
1 / 4

S-hook with a load capacity of 10 kg

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

S-hook with a load capacity of 10 kg; PETG

Ocena
0 / 5
Polubienia
0
Pobrania
20
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

s-hook with a load capacity of 10 kg
 

inner diameter 20 mm

axis distance 50 mm
 

The load capacity depends on the material used and the printing technology.

A load of 10 kg seems to be safe when the load is approximately in the middle of the hook and the printing conditions and material are respected.

The theoretical load capacity is over 20 kg, but better not to try.


Conditions:

PETG material (strength over 50 MPa)

Minimum 3 walls, 30% infill, 1 mm bottom and top layer.
Speed max. 60 mm/s

The hook lies on its side when printing (no supports).

If you want a different hook shape, you can write me a message. 
I am not responsible for any damages that may occur if the hook is broken. 

Tagi