S-hook with a load capacity of 10 kg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
S-hook with a load capacity of 10 kg; PETG
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
s-hook with a load capacity of 10 kg
inner diameter 20 mm
axis distance 50 mm
The load capacity depends on the material used and the printing technology.
A load of 10 kg seems to be safe when the load is approximately in the middle of the hook and the printing conditions and material are respected.
The theoretical load capacity is over 20 kg, but better not to try.
Conditions:
PETG material (strength over 50 MPa)
Minimum 3 walls, 30% infill, 1 mm bottom and top layer.
Speed max. 60 mm/s
The hook lies on its side when printing (no supports).
If you want a different hook shape, you can write me a message.
I am not responsible for any damages that may occur if the hook is broken.