ZMK Nice Nano 128x64 OLED Dongle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple case for your ZMK dongle, using a nice!nano, and a 128x64 0.96" OLED display
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 1834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Print as oriented in the model, I used ABS, but any filament should do.
The tolerances are quite tight, so you may need to adjust scaling, but it fit up pretty nicely for me :)
Requires soldering wires directly to the display/controller PCBs (no headers), and routing them through the cable channel in the display cover. You'll probably need to use relatively thin wire (I used CAT5 strands) to make it fit well.
Uses two m2x10 self tappers to hold the back cover on, but you could probably get away with leaving them out and having your USB C cable hold it together.
The CAD is kind of messy (because I was deciding how it would work as I went!) but if you want it, you can find it here.
Based on this awesome project by Maximilian Engl, and this extension by Marcos Chow Castro.