SV08 Top Feeding Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cross bracing spool holder for the SV08.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A triangulating Spool holder that feeds from the top and utilizes the factory M3 mounting holes in the top frame. It acts as a cross brace and prevents the top aluminum profiles from twisting.
!!!!! The current revision has no mounting point for the factory filament runout sensor. The factory wiring for said sensor is too short for the new spool position. Either way he sensor needs to be disconnected, over ridden, or the wiring needs to be adjusted. !!!!!
Additional hardware is needed. Please refer to the PDF for the hardware specs and possible alternatives. As well as mounting tips and illustrations.
Furthermore a way to stabilize the umbilical cord needs to be provided. I personally use a retractable badge holder, as shown in this video: