1 / 14
Mounts to attach 48" power strip to Muscle Rack metal shelving + plus optional Locking Cap Inserts for them — zdjęcie 1
1 / 14

Mounts to attach 48" power strip to Muscle Rack metal shelving + plus optional Locking Cap Inserts for them

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounts to attach 48" power strip to Muscle Rack metal shelving + plus optional Locking Cap Inserts for them

Ocena
0 / 5
Polubienia
5
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables

Printed mounts to attach a 48" power strip to Muscle Rack metal shelving (48 width) + plus optional Locking Cap Inserts for them.

Printing tips

  • Print as oriented
  • No supports required
  • Infill, perimeter walls, and layer heights (based on 0.4 mm nozzle): 
    • Muscle Rack Power Strip Mounts (print 2 of them):
      • Infill 15% (suggested)
      • Perimeter walls: 4 (suggested)
      • Layer height 0.28 mm (suggested)
    • Locking Cap Inserts (print 2 of them):
      • Infill 15% (suggested)
      • Perimeter walls: 5 (suggested) 
      • Layer height 0.12 mm (suggested)
  • Filament selection:
    • Muscle Rack Power Strip Mounts:
      • Either PLA or PETG. I used PLA
    • Locking Cap Inserts:
      • Either TPU (suggested) or PLA. I used PLA but they are tough to install if not printed in TPU.
  • The included .3mf files are the OrcaSlicer setups I used for printing these on my Flashforge Adventurer 5M printer, an excellent, affordable, high speed, CoreXY printer.

The excellent Flashforge AD5M printer is currently selling for only $279 with a $20 coupon that Amazon is offering (Amazon affiliate link): https://amzn.to/4h4dYLD 

 

Which shelves and which power strip are these designed for?

This is the Muscle Rack shelving unit that this was designed for (Amazon affiliate link): 
"Muscle Rack UR245P-BLK 5-Shelf Unit, 48" Width x 72" Height x 24" Depth" — https://amzn.to/4kbU5VP 

This is the type of 48" power strip this was designed for (Amazon affiliate link): 
“12 Outlet Heavy Duty Metal Surge Protector Power Strip with 6-Foot Long Extension Cord, 125V/15A, Black” — https://amzn.to/3QASaN5

And here are photos of my Muscle Rack shelving with a power strip attached:

And here are photos of the Locking Cap Inserts, in the second photo shown already installed:

Installation:

  • Either use tape to temporarily hold the 48" power strip in position, or have a second person to help hold it for you.
  • Slip the two(2) printed mounts (named “Muscle Rack Power Strip Mount (universal) v2.0.stl”) in place onto the power strip.
  • Press the mounts' upper and lower locking protrusions into the holes on the uprights of the Muscle Rack shelving, and slide down in the grooves to secure them.
  • Optionally, pop in two of the “Locking Cap Insert.stl” parts to make sure the mounts cannot be accidentally pushed up. These parts are a very tight press fit, and unless you printed in TPU for flexibility, it will take quite a bit of finagling and pressing to get them in.