1 / 14
Mounts to attach 48" power strip to Muscle Rack metal shelving + plus optional Locking Cap Inserts for them — image 1
1 / 14

Mounts to attach 48" power strip to Muscle Rack metal shelving + plus optional Locking Cap Inserts for them

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mounts to attach 48" power strip to Muscle Rack metal shelving + plus optional Locking Cap Inserts for them

Rating
0 / 5
Likes
5
Makes
0
Views
195
Reviews
0

Updated at source:

Model information

Printed mounts to attach a 48" power strip to Muscle Rack metal shelving (48 width) + plus optional Locking Cap Inserts for them.

Printing tips

  • Print as oriented
  • No supports required
  • Infill, perimeter walls, and layer heights (based on 0.4 mm nozzle): 
    • Muscle Rack Power Strip Mounts (print 2 of them):
      • Infill 15% (suggested)
      • Perimeter walls: 4 (suggested)
      • Layer height 0.28 mm (suggested)
    • Locking Cap Inserts (print 2 of them):
      • Infill 15% (suggested)
      • Perimeter walls: 5 (suggested) 
      • Layer height 0.12 mm (suggested)
  • Filament selection:
    • Muscle Rack Power Strip Mounts:
      • Either PLA or PETG. I used PLA
    • Locking Cap Inserts:
      • Either TPU (suggested) or PLA. I used PLA but they are tough to install if not printed in TPU.
  • The included .3mf files are the OrcaSlicer setups I used for printing these on my Flashforge Adventurer 5M printer, an excellent, affordable, high speed, CoreXY printer.

The excellent Flashforge AD5M printer is currently selling for only $279 with a $20 coupon that Amazon is offering (Amazon affiliate link): https://amzn.to/4h4dYLD 

 

Which shelves and which power strip are these designed for?

This is the Muscle Rack shelving unit that this was designed for (Amazon affiliate link): 
"Muscle Rack UR245P-BLK 5-Shelf Unit, 48" Width x 72" Height x 24" Depth" — https://amzn.to/4kbU5VP 

This is the type of 48" power strip this was designed for (Amazon affiliate link): 
“12 Outlet Heavy Duty Metal Surge Protector Power Strip with 6-Foot Long Extension Cord, 125V/15A, Black” — https://amzn.to/3QASaN5

And here are photos of my Muscle Rack shelving with a power strip attached:

And here are photos of the Locking Cap Inserts, in the second photo shown already installed:

Installation:

  • Either use tape to temporarily hold the 48" power strip in position, or have a second person to help hold it for you.
  • Slip the two(2) printed mounts (named “Muscle Rack Power Strip Mount (universal) v2.0.stl”) in place onto the power strip.
  • Press the mounts' upper and lower locking protrusions into the holes on the uprights of the Muscle Rack shelving, and slide down in the grooves to secure them.
  • Optionally, pop in two of the “Locking Cap Insert.stl” parts to make sure the mounts cannot be accidentally pushed up. These parts are a very tight press fit, and unless you printed in TPU for flexibility, it will take quite a bit of finagling and pressing to get them in.