1 / 2
AR15 PMAG M2 + M3 Dust Cover no supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now fits M2 + M3! Printable Dust Cover for MagPul AR15 PMAGs
- Ocena
- 5 / 5
- Polubienia
- 112
- Pobrania
- 639
- Wydruki
- 10
- Wyświetlenia
- 1443
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 10) (Komentarze: 14)Remiksy (0)Kolekcje (183)Powiązane
New design that fits both M3 and M2 PMAGs. Huge thanks to @CodfishDan_1930853 for helping me tweak the model to fit M2 PMAGs!
Dust Cover for MagPul AR15 M2 + M3 PMAGs. Optimized for printing. I was able to get rid off all but one overhang, but a well calibrated machine can handle the small remaining overhang easily without supports.
Versions available:
- v5: standard version
- v5 LT: removed as much material as possible but therefore not as much surface on print bed. if you have issues with adhesion, use v5 instead
- both versions have a lanyard loop for paracord
Recommended Print Settings:
- print on side (file is oriented correctly)
- 0.15 or 0.2mm Layer Height
- no supports needed
- 3+ Perimeters
- 100% Infill
- PETG
Local laws apply
If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…