Filament cutter for Sapphire Plus 5 V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits TwoTrees Sapphire Plus v3 only.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Filament cutter adapted for the sapphire plus v3 (Work in progress).
Fits TwoTrees Sapphire Plus v3 only.
A detail to take into account, the filament cutter sacrifices a little bit of printing area to cut, it is not much, but we will have to take it into account when making use of our printing tray. If you want to exclude this cutting area in the Orca Slicer you will have to configure it as follows:
Printer settings > Basic information > Excluded bed area:
287x256, 300x256, 300x300, 287x300
It is very likely that your blades will not fit mine, so you will have to create your own in CAD, and subtract it in the laminator from the ‘Part_4’ model.
You will need a spring, I have had good results with a spring 18mm long and 6mm in diameter (the spring should not have too much resistance).
Many thanks to the author (The Printing Shark) of the original model for sharing.
The nozzle wiper is not directly related to the filament cutter, but I share it here as well. You will notice that it has some notches at the bottom, I use them to tie the silicone brush, which by the way, is from a BambuLab A1, with dental floss or nylon fishing line.