1 / 3
5020 Fan Blower Mount - Creality Ender 3 V3 SE — zdjęcie 1
1 / 3

5020 Fan Blower Mount - Creality Ender 3 V3 SE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Blower Fan upgrade for the Ender 3 V3 SE.

Ocena
5 / 5
Polubienia
19
Pobrania
79
Wydruki
2
Wyświetlenia
931
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This replaces the stock 4010 Fan with a 5020 Blower. 

=>>> Significantly less noisy than the stock cooler <<<=
Pushes more air, but be advised, noise level will increase.

You'll need (2) M3x20 Flatheads with Nuts, or M4 heatset inserts + Flatheads to mount the Fan and the original (2) M3 Flatheads to mount the Shroud.

Fans I used: https://de.aliexpress.com/item/1005007594043332.html?spm=a2g0o.order_list.order_list_main.87.405c5c5fhklcVk&gatewayAdapt=glo2deu
(gdstime 5020 Blower)

Note: The Printer uses JST 1.25 connectors; You can get them here: https://de.aliexpress.com/item/1005004732865407.html?spm=a2g0o.order_list.order_list_main.72.405c5c5fhklcVk&gatewayAdapt=glo2deu

(Sometimes you need to swap the polarity of the connector with the printer, red to black, black to red)

Tested:
Printed with Sunlu PETG (Red Transparent) at 230°C 20% Gyroid Infill
Can be bought at:
https://de.aliexpress.com/item/1005006897332758.html?spm=a2g0o.order_list.order_list_main.105.405c5c5fhklcVk&gatewayAdapt=glo2deu

Updates:

v11: narrower duct, better angle at nozzle, closer distance, lifted cutout for fan assembly plastic
v7 fix: fixed blower input size (was 29mm, now is 26.2mm)

 

Upcoming revamp ~ April 2025:

  • Flip Fan
  • Add small (optional) Cover to the fan

 

Made by: AI-Krieger (Me)

Website: ai-krieger.de

Tagi