Parametric N52 Magent Magazine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A super quick space-saving organiser for common sized magnets. Prints in 10 minutes and uses >2g of filament.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 82
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I needed a really quick and simple holder for these magnets to store in a small 3D-Printed drawer system, as the box they came in was too large.
This design is for 10x2mm specifically, however it should be easily scaleable in your slicer if you have disc magnets of a different diamater, and/or if you need to fit more than the approx. 20 this fits as standard.
As a bonus tip, if you allow for a little extra height, you can invert one magnet in the magazine which will cause the rest of the “tower” to float, making them a little easier to get hold of.