My1020 to Predator 212 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a my1020 motor to your mini bike.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick plate I made up to mount a motor I had to an old doodlebug frame. Has slots because I didn't have a chain tensioner and this was easier for me. It accepts M8 bolts thru the holes and the slots. It is easier to mount the motor loosely to the plate with nuts in the slots, mount the plate to the frame, then slide the motor to pull the chain taut and tighten it down.
I added modifier meshes to force 100% concentric infill so I didn't have to worry about over-tightening.
You will also need a #35 sprocket for your motor, most are 8mm and 10mm “double d” shaft.