P
Printablesccc888
Water Dispenser Adapter for Coleman Chiller 5 Gallon Water Jug
Bottom face down, print with support to get the best result.
- Pobrania
- 53
- Polubienia
- 9
- Ocena
- 0
Wyniki wyszukiwania: coleman
Liczymy pasujące modele…
P
Printables
Coleman Ice chest corks
A quick fix for missing water drains on a Coleman ice chest. Printed as we were leaving on our trip, worked. Print with anything, cubic infill will keep them from crushing in on themselves and make them float better.
P
Printables
Propane Cylinder Stand for Coleman – Modern and Stable Design
This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…
P
Printables
Water Dispenser Adapter for Coleman Chiller 5 Gallon Water Jug
Bottom face down, print with support to get the best result.
P
Printables
Coleman lantern and stove leather pump mold
This is the 15th (and final) version after a LOT of tweaks. I got sick of paying way too much for the Coleman leather pump cups for my lanterns and stoves (if I was even able to find them). The neoprene ones are horrible and always fail…
P
Printables
Coleman Directional louver fin
A directional louver for a Coleman-Mach RV air conditioner found on the Winnebago Rialta RV. This part directs the cold air inside the cabin. Twelve fins are required for the ceiling distribution assembly mounted inside the coach under…
P
Printables
Creola Katherine Coleman Johnson — Bust
Creola Katherine Coleman Johnson — Buste Ce buste rend hommage à Creola Katherine Coleman Johnson, mathématicienne de génie dont les calculs ont joué un rôle essentiel dans les premières missions spatiales américaines. Figure majeure de…
P
Printables
Coleman Cooler Hinge
Great design but I wanted a few modifications. I thinned the section where the mounting screw goes, so I could use the original screws and still have thread engagement similar to the original hinge. I made a new bottom-side hinge by…
P
Printables
RV fridge lock Coleman 17b / 17R may work for other camp trailers
I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…
P
Printables
Coleman Cooler Hinge
This is a print-in-place hinge for Coleman coolers. The “PIN” version is designed to have the same opening stops that the original hinge and the “CONE” version stops at 90 degrees to reduce the stress on the screws holding the hinges on.…
P
Printables
Strut for Coleman Instant (Ez-up) tent
Opened up my tent and found one of the struts at top of built in poles was broken. This is replacement strut. I would print in PETG to withstand higher temperatures and sunshine. Tips appreciated: https://ko-fi.com/yuggniiks
P
Printables
coleman lantern fount bumper
This is a fount bumper to place on the bottom of a Coleman lantern, printed in TPU. This is a work in progress and there will be many more changes. Dont shrink this to fit a smaller fount, it wont line up properly Wait for a small fount…
P
Printables
coleman lantern fount bumper
I got tired of scuffs on the bottom of the fount for my 1971 Coleman 228F lantern so I designed a simple solution. This should fit most older Coleman lanterns, if not just adjust the size of your print +- % and you should be good. Printed…
P
Printables
Coleman Water Bottle/Thermos Handle Replacement
Replacement handle for this style of Coleman water bottle/thermos Designed to use either the original metal ‘rivets’ the bottle already uses or a 2.5/3mm screw with a small washer. Amazon.com : Coleman FreeFlow Vacuum-Insulated Stainless…
P
Printables
Coleman Ice chest corks
A quick fix for missing water drains on a Coleman ice chest. Printed as we were leaving on our trip, worked. Print with anything, cubic infill will keep them from crushing in on themselves and make them float better.
P
Printables
Coleman camping cot clamp handle
The velcro strap that came with the Coleman cot was tearing apart and wasn't holding anymore. I decided to make this clamp to hold the cot together so it can also be lifted and stored more easily. Made the model on Tinkercad. I recommend…
P
Printables
Valve Seal for Coleman Powermate Air Hammer 024-0075CT
Valve seal for Coleman Powermate air hammer 024-0075CT This is the stupid space-gun design with the red plastic trigger (see photo), not the prior common design with a pivoting trigger. This file may be able to be adjusted to fit other…
P
Printables
Propane Cylinder Stand for Coleman – Modern and Stable Design
This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…
P
Printables
Large Coleman Cooler Box Hinges
Fusion 360 file provided, if you need to make changes. I printed this with SBS material on my Creality K1. If you find your bending section cracks, then thin it more. currently it is 1,5mm thick where it bends.
P
Printables
Coleman Event Shelter Foot
We lost a foot of our Coleman event shelter, so I remodeled one. It's almost a one to one replica, apart from thicker walls for additional strength.
P
Printables
Predator 224 Air Intake Cover - Coleman Minibike
Replace your air intake cover with your own printed model, adding color or intake options as you please! This fits the Predator 224 non-hemi. I don't know if this fits the 212 or other 224 hemi versions, but if you have one or know,…
P
Printables
Coleman Minibike Front Wheel Bearing insert
While replacing the bearings in my front tire of my Coleman CT200U, I damaged the bushings that hold the axle housing centered. 3D printed these in TPU and they do a decent job. They're tight around the bushing but have some play around…
P
Printables
Benji Coleman Schedule 1
This is Benji Coleman, he is not a cop and will not snitch on you. --Created with Meshy
P
Printables
Coleman Cooler Plug with Strap
Print in a flexible filament like TPU. https://cad.onshape.com/documents/c4b0301bb931b140648883c3/w/3a9e5ce6a0f532bb646d12ec/e/061bd83916be84db296c48cb?renderMode=0&uiState=68232b27aa2cdf3d6ef3f73e
P
Printables
Ozark Trail Handle For Use With Coleman Latch
This handle is not directly compatible with Coleman coolers (could be with modifications). This handle allows a Ozark Trail steel cooler to be adapted to use the latch from a Coleman cooler (the latch will need the mounting holes narrowed…
P
Printables
Towel hook for Coleman/Bestway above ground pool
This is a simple towel hook that hangs off the top steel rail of a Coleman Power Steel pool. I designed it for my 22' pool but I imagine it would fit other sizes as well assuming the top steel rail is the same shape and size. Printed in…
P
Printables
Coleman Stove Stencils
I like stencils. The detail you can get from these stencils is great! You can use them on anything! I was really impressed with the results for the T-shirts. I dare you to try them out. These stencils have been great for our Coleman…
P
Printables
Parametric nozzle for high-volume inflators (Ryobi, Bauer, Coleman, Makita etc)
This is an attempt to create a parametric (customizable) OpenSCAD nozzle for the Ryobi high-volume low-pressure inflator that can be adjusted to work with a particular inflatable. The tip that comes with Ryobi is about 7mm, while most of…
P
Printables
Flextail to Coleman Supercomfort Self-Inflating Sleeping Mat
This is printed in TPU to match the soft seal the original bag uses; however, if it works in anything else, please feel free to share in the comments. The sleeping mat I have is the Coleman Supercomfort Self-Inflating Sleeping Mat 12cm…
P
Printables
Coleman (and similar) portable 2.4m gazebo repair clips
There are a bunch of different brands for very similar light weight aluminium fold-up 2.4m gazebos. They are prone to the thin sections snapping where they cross each other when subjected to high winds. The one we were specifically…
P
Printables
Coleman/Bestway spa panel cover
Panel too bright to see stars? This will help with that 5 bottom lays
P
Printables
Coleman Cooler Handle
First model published, be kind ;) coleman cooler handle replacement glacière coleman poigné de remplacement.
P
Printables
Coleman LED Lantern Handle
A new handle for a Coleman 4AA LED camp lantern. https://www.coleman.com/4aa-led-camp-lantern/2000002593.html Print Settings Printer Brand: Prusa Printer: Prusa Mk1 Rafts: No Supports: Doesn't Matter Infill: 100 Category: Gadgets
P
Printables
Coleman LowBoy Camping Fridge Lock Replacement
A neighbor left in the curb this camping fridge because the lock was broken... Looks like he doesn't have a 3d printer! I designed and printed this Coleman LowBow lock replacement to bring this almost new fridge back to life. Here you can…
P
Printables
Coleman lantern and stove leather pump mold
This is the 15th (and final) version after a LOT of tweaks. I got sick of paying way too much for the Coleman leather pump cups for my lanterns and stoves (if I was even able to find them). The neoprene ones are horrible and always fail…
P
Printables
Coleman Propane Stove 5400A700 Replacement Knob
This print replaces the plastic intensity knobs on the old Coleman two burner propane camping stove. Unscrew the screw from the metal stalk, remove it and the thin circular metal "Off" plate if you still have it. Put the plate into the…
P
Printables
Coleman Directional louver fin
A directional louver for a Coleman-Mach RV air conditioner found on the Winnebago Rialta RV. This part directs the cold air inside the cabin. Twelve fins are required for the ceiling distribution assembly mounted inside the coach under…
P
Printables
Creola Katherine Coleman Johnson — Bust
Creola Katherine Coleman Johnson — Buste Ce buste rend hommage à Creola Katherine Coleman Johnson, mathématicienne de génie dont les calculs ont joué un rôle essentiel dans les premières missions spatiales américaines. Figure majeure de…
P
Printables
Intex Pool Skimmer Adapter for Coleman Pool
I bought this pool skimmer from Amazon for my pool. This particular model is designed for use with Intex pools that have a through-the-wall, screw type pump port. Coleman pools, unfortunately, do not. This adapter is inserted into the…
P
Printables
Coleman Above Ground Pool Angled Return Diverter
The return hose on our Coleman 14' x 42" above ground pool shoots the stream straight out into the center of the pool. Any pool this large (or larger) really should have the return flow diverted to the side, away from the inlet so that…
P
Printables
Larger Hose Holder For Coleman Above Ground Pools
When I saw m99's pool hose holder , I was struck by the genius of that design. Why Intex (and other pool manufacturers) thought it was a good idea to have the pump hoses coming of the sidewall of a vinyl pool with no support whatsoever,…
P
Printables
Avenli/Bestway/SaluSpa/Coleman Inflatable Hot Tub — Type VI Filter Adapter
The Problem The Avenli Vermont inflatable hot tub ships with a filter cartridge (marked "Type 2") that doesn't quite fit standard sizing, it has a smaller bore and different ring placement. Replacements are harder to source, more…
P
Printables
Coleman Cooler Hinge
Great design but I wanted a few modifications. I thinned the section where the mounting screw goes, so I could use the original screws and still have thread engagement similar to the original hinge. I made a new bottom-side hinge by…
P
Printables
RV fridge lock Coleman 17b / 17R may work for other camp trailers
I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…
P
Printables
Cool Living AC remote wall mount (Coleman 17B / 17R)
A real simple wall mount for the Air conditioner remote control in my Coleman 17B/17R. Just use some double sided tape to mount it to the wall. If someone requests one with screw holes I will upload another model. I print all of my RV…
P
Printables
Coleman camp trailer shelf hook 17B/17R .750 wide
For best result enable supports and orient the hook as shown on the print bed. I designed this for my coleman 17b so that kids can hang some of their stuff once we are set up.
P
Printables
Hinge for Coleman Cooler
Hinge for a coleman cooler, replaces the flexure hinge. Print in the side orientation to maximize strength. Use supports.
P
Printables
Coleman QuickPump Adapter
Additional adapter/nozzle for Coleman's QuickPump. Needed a finer (smaller diameter) nozzle (adapter) to fit into some smallish inflatable kiddie pool for a water day at school. Got one designed and printed in about two hours, and in one…
P
Printables
Coleman Cooling Box Spare Part Handle Knob 52 QT | 52QT Extreme
Print with 0.2 or 0.15mm layer height. Orientation lying with Supports should increase strength as printing lines are perpetual to force vector. Use PETG or ABS for extra strength.
P
Printables
Mini Coleman Chiller Koozie - Coka Cola Theme
This is my version of the Mini Coleman Can Koozies, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…
P
Printables
Mini Coleman Chiller Koozie - Dr Pepper and Diet Dr Pepper Theme
This is my version of the Mini Coleman Can Koozies, done in the Dr Pepper and Diet Dr Pepper Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in…
P
Printables
Mini Coleman Chiller Koozie - Milwaukee Theme
This is my version of the Mini Coleman Can Koozies, done in the Milwaukee Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I included…
P
Printables
Mini Coleman Chiller Koozie - Harley Davidson Theme
This is my version of the Mini Coleman Can Koozies, done in the Harley-Davidson Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…
P
Printables
Coleman 424 Stove - Valve Wheel Knob
we needed a new knob for my local boy scout troop camp stove, i forgot to take a picture of the finished product. i printed it out of ASA
P
Printables
Mini Coleman Chiller Koozie without the Lid - Coke and Diet Coke Theme
This is my version of the Mini Coleman Can Koozies, this one is done without a lid, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a…
P
Printables
Mini Coleman Chiller Koozie - Dodge SRT Demon Series Theme
This is my version of the Mini Coleman Can Koozies, this one is done without a lid, done in the Dodge SRT Demon Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a…
P
Printables
Anova Pro Sous Vide to Coleman Party Stacker Collar Adapter
Collar adapter for an Anova Pro Sous Vide stick on a Coleman Party Stacker 48 can. Sized to fit a 2.5" hole cut with a hole saw. Anova Pro is 2.37" dia. The collar makes up for the gap between the two and has a lip to hold the Anova in…
P
Printables
6inch wheel collection coleman cooler
Lost the wheel and axle assembly on a fishing trip. this not only made it cumbersome to move the cooler, the wheels act to stabilize the unit. Its a decent cooler and I couldnt toss it in the dumpster just because I lost the wheels.…
P
Printables
COLEMAN MATTRESS BLOW DRYER ADAPTER
I created this when the blower for my air mattress died. It is a difficult print. Your support settings need to be dialed and your layer adhesion needs to be on point.
P
Printables
Coleman/Fleetwood Redwood Camper Thermostat Box
I needed a replacement box for my popup camper renovation. This was measured after the dimensions of the original. which is about 149mm x 149mm. This can be a 1:1 replacement for the original box that is damaged. I left it solid and will…
P
Printables
Coleman tent clip replacement
This is the replacement for my Coleman tent clip. I used cable tie to hook it into the tent strap. The instruction is here https://gubutek.wordpress.com/2022/06/25/fix-coleman-broken-tent-clip/ I hope you can fix your tent for the next…
P
Printables
Coleman tent sign holder
print out of petg so it doesn't warp as easy in the heat. no supports and i printed .20
P
Printables
Simple Coleman plug for cooler. TPU
To replace my broken plug on my coleman. Printed in TPU
P
Printables
1:8 scale camp stove like coleman
nozzle: 0.4 parts: M2 x 4mm ( visual gas cap) M2 x 8mm M2 x 25mm
P
Printables
Captive furnace door handle and seal - Coleman Furnace
Summary - Replacement for the captive door handle and seal on a Coleman high-efficiency furnace. Story - while opening the door on the top of my furnace, the original captive doorknob popped out and rolled into a hole in the floor. I used…
P
Printables
Coleman drain hole plug (Screw)
This kit is to replace all the part from the original cooler Coleman drain plug. I made the design to used the original gasket to prevent leak. You can print the gasket in TPU or maybe use a gardenhose gasket. Personnally, I printed it in…
P
Printables
Coleman cooler small hinge
For Coleman coolers with a secondary cover on top. This is the model of the small hinge. Printable in PETG with 0.4mm nozzle and supports. Enjoy!
P
Printables
Coleman Lantern Box
A simple box for a white gas Coleman lantern. It's basically impossible to find a case that fits these lanterns as they use glass and are thus susceptible to breakage during transport. This model uses piano hinges on the top and a normal…
P
Printables
1lb Coleman Propane Base
Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden
P
Printables
Coleman Powerhouse Dual Fuel Lantern Travel Case
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coleman Powerhouse Dual Fuel Lantern Travel Case. Hardware…
P
Printables
Coleman Dual Fuel 533 Stove Travel Case
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coleman Dual Fuel 533 Stove Travel Case. Hardware required;…
P
Printables
Coleman Dual Action Pump Base Plate
My trusty Coleman Dual Action Quick Pump's base plate finally shattered after many years of use. I snapped a photo of it next to a ruler, and after about 30 minutes of Fusion360, I printed out a replacement. Worked perfectly on the first…
P
Printables
1:10 - Scale Coleman Cooler
1/10th scale model of a Coleman cooler for use as a prop or accessory. Because reasons! This is a remix of OMW2FYB's work whom remixed from Schlauncha and I believe that is a remix of someone else work. I simply prepared this for a single…
P
Printables
Coleman drain to Intex Pump fitting
Adapted so it would connect to the drain fitting on a Coleman (year 2020) pool so it could be connected to the backwash line. How used: Disconnect Intex discharge (backwash) line Connect adapter to pool Connect discharge (backwash) line…
P
Printables
Adjustable Foot for Coleman Eventemp Stove
Replacement foot for Coleman Eventemp to allow leveling of the stove on an uneven or sloping surface
P
Printables
Anova Sous Vide Adapters for Coleman Stacker Cooler
I created an adapter set for my Anova Sous Vide Bluetooth/Wifi cooker to use with my Coleman Stacker cooler. This is a three piece kit that has a screw on mechanism for the inside of the cooler, and two variations of the top - an open one…
P
Printables
Tarp Awning hook for Coleman popup
We bought a used pop-up camper that didn't come with an awning. After watching this video We made some adjustable PVC legs and printed these hooks to make a cheap tarp awning. Printed with Orange Hatchbox PETG Sliced with Prusa Slicer…
P
Printables
Coleman CT200U or CT200 Minibike Front Rack Mount
Adding the front suspension kit from Coleman to a CT200U removes the place to mount your front rack. These arms give tha
P
Printables
Coleman pump adapter
Simple adapter for my battery operated Coleman pump. There are 3 test models: top test: The top is small and require adequate cooling. try printing this to see if your fan speed % is good enough. 24.8 and 25.2 base test: Print these out…
P
Printables
Coleman 100qt 5 Day cooler Lid Prop
A wedge I made to keep the cooler lid open while filling the cooler. It was made for a Coleman 100qt, 5-day cooler, but it's pretty universal and should fit many different styles, printed with 20% infill, no supports, standard settings. I…
P
Printables
Coleman Mach Rooftop AC
This air ramp thingy makes the air conditioner considerably quieter and improves airflow. Fits both 15k & 13K BTU units.
P
Printables
Coleman Xtreme 100QT Cooler Lid Prop
I can't found the right one for my Coleman Xtreme 100QT cooler so I create my own. Just a simple part, to keep the lid open, when you don't use the cooler. Printed with Extrudr PLA NX2 hellfire red with a 0,4mm nozzle and 0,2mm layer…
P
Printables
Coleman Cooler Lid Prop
I got tired of our scout troop's coolers getting put away wet/damp and getting moldy. So, I designed a prop to hold the lid open partway to allow air to move through and prevent this. The prop was designed to fit onto the front lip of the…
P
Printables
Coleman Drain Plug Replacement
Complete drain plug assembly for a Coleman Xtreme cooler. The original Coleman design is just a push fit plug but the drain body exposes a bit of thread which could support a threaded plug. This is what I decided to make. This particular…
P
Printables
Coleman Onesource Battery Cap
Embossed arrow on the side of the model to help align the battery. Print settings: 0.6mm nozzle 0.3m layer height Supports everywhere Organic support 3 perimeters 6/23/2023: Added additional model for multiple batteries. Import the bodies…
P
Printables
Coleman Camper door handle
My camper handle broke so I made this up and has held up over a year so far. I suggest printing in ASA but PETG will also work.
P
Printables
Retro Coleman Ice Chest
This is a remix of a file I got from Thingiverse, I sized it up 300% and added the Coleman logo. I used Hatchbox white PLA, Silk Silver, Bambu Lab Metal Green PLA, and Bambu Lab Basic red PLA. The logo was printed with a .2 nozzle to get…
P
Printables
Pin holder for tent poles - Coleman McKenzie Cabin 4 (IKEA Ivar Pins or screws)
I printed this pin holder for our Coleman McKenzie Cabin 4 in order to fix the tent poles to their genuine attachement (holes). You might have to change diameters according to your poles or screws you use. For this, I included step- as…
P
Printables
Coleman Camp Stove Leveling Feet
These prints fit over the stamped feet ‘humps’ on the bottom sheet metal of the Coleman Triton 2-burner stove, so that it can be leveled when placed on a campsite picnic table. As you may know, campsite picnic tables are never level to…
P
Printables
Coleman LED Lantern Knob
If you have this lantern, the knob will break. Pay close attention to orientation of the "double" switch design of the lantern. I believe this is a better design, and an example of what would be a challenge for injection molding.
P
Printables
Coleman's Mach centrifugal blower wheel 1472a1191
This is a blower that I dimensioned as a direct replacement for the Coleman Mach 8 1472a1191 centrifugal blower fan. These fans are prone to drying out, becoming brittle and throwing shrapnel into your A/C unit. Good to have one on hand…
P
Printables
Ring Connector for Coleman Steel Wall Pool
Someone fell over the side of our pool this year while we were cleaning it. It broke the plastic ring that holds the liner up, leaving us with a broken pool because they do not send spare connectors for the ring. I decided to make some…
P
Printables
LCD Screen Shade for Kandi and Coleman Golf Carts
Introducing the LCD Screen Shade for Kandi and Coleman Golf Carts 3D Model: Elevate your golf cart experience with our meticulously designed LCD Screen Shade, tailored specifically for Kandi and Coleman models. This innovative 3D model…
P
Printables
feet coleman peak 550B (multi fuel stove)
Feet for the coleman peak 550B multi fuel stove. Made to fit them to the stove with an m3 bolt.
P
Printables
Coleman Xtreme5 Cooler Handle
Lent the cooler out and it came back with a broken handle. This model re-uses the “nubs” that hold on the original handle. It functions the same as the original - can be rotated around etc. Printed in PETG. I have lifted the cooler up…
P
Printables
Coleman 17FQ Camper Kitchen Cubby
I designed this for my 2017 Coleman 17FQ Travel Trailer. There is a nook in front of the kitchen sink that we wanted to use for toothbrushes and other toiletries but were worried about water damage to the wood. I designed this to fit in…