Natural Gas/Propane Adaptor for Coleman Powermate Pulse Plus 1750
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the factory screws are very short.
Designed for a Coleman Powermate Pulse Plus 1750 portable generator.
I have several designs I was experimenting with. v2 is what I ended up using. Created a slight restriction and director to help pull natural gas into the carb. Don't know if this helps or not. Attempt to make it easier to start.
Use a material that can handle higher temperatures and fuel vapor like ABS or PETG.
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
Any
Infill:
100%
Filament: Any PETG or ABS Any
Notes:
Hose connection will need supports between bed and bottom of hose connection. Supports are not needed inside the hole in the hose connection.
Category: Parts