Natural Gas/Propane Adaptor for Coleman Powermate Pulse Plus 1750
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 45
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the factory screws are very short.
Designed for a Coleman Powermate Pulse Plus 1750 portable generator.
I have several designs I was experimenting with. v2 is what I ended up using. Created a slight restriction and director to help pull natural gas into the carb. Don't know if this helps or not. Attempt to make it easier to start.
Use a material that can handle higher temperatures and fuel vapor like ABS or PETG.
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
Any
Infill:
100%
Filament: Any PETG or ABS Any
Notes:
Hose connection will need supports between bed and bottom of hose connection. Supports are not needed inside the hole in the hose connection.
Category: Parts