Counting matching models…
This is a quick modification of duanesdiesel's scale propane tank that turns the model into a secret storage/stash container. The two parts friction-fit together tightly. Can be scaled, but make sure to scale both parts exactly the same…
Made to fit Coleman 1lb propane tanks
This is a quick modification of duanesdiesel's scale propane tank that turns the model into a secret storage/stash container. The two parts friction-fit together tightly. Can be scaled, but make sure to scale both parts exactly the same…
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
A much easier to use hand nut for the top lid of a Camco Propane Tank Added two versions that use a heatset thread insert (M5x9.5) - https://www.amazon.com/ruthex-Threaded-Insert-Pieces-Ultrasound/dp/B07YSVXWS8/ref=sr_1_1_sspa?th=1
A horizontal HO scale (1:87) 500 gallon propane tank for trackside communication hut emergency / backup power. Print in either white or gray PLA. No supports required.
A ring to help mount a disposable propane cylinder for camping. I printed two and then used quick ties. The small tabs used to squeeze the ring could be a bit thicker, but they work well enough. Category: Sport & Outdoors
Generic 500 gallon propane tank in HO scale *smoothed version has rounder sides and support braces are now triangle shaped added a version of the smoothed tank that contains a hollow and a drain hole if you want to resin print these…
I designed these TPU rings to protect the bottom rims of my camper's two 11lb propane tanks and to provide enough clearance to install a Mopeka Pro Check sensor on each tank. The Mopeka sensors require about 1/2 inch of clearance under…
Holds two standard 1lb propane bottles (Coleman style) upright and prevents them from rolling. Designed for drawer or cabinet storage, originally made for an RV, but works anywhere you want to keep small propane bottles organized and…
Propane tank ring complete or a third of a ring (print 3 thirds for use with 180mm bed printers) to cover the metal base and prevent it from contacting your deck. These should fit tightly with a press fit. Only the third version has been…
Created this for a cap i needed on propane tank. inside dimension is 57.35mm fits 57.16 part perfect.
I do a lot of grilling and where I live everything is tank exchanges. You get an inspected tank every time, which is good! The bad thing is they use a 400lb gorilla to close the valve down before it leaves the blue rhino facility.…
Was getting frustrated with putting on and removing the torch onto my tank when I needed to use it to start my Big Green Egg. I could kinda tighten it with my hands, but with this new built in wrench, now things are super easy. How to…
This adapter sits between the carburetor and the airbox to provide injection of natural gas or propane wile still allowing for full function of gasoline. I printed this in TPU so it would self seal. I used this in conjunction with a KN…
Easy to print and easy to use key for gas cylinder (hexagon nut). Suitable for use for garden grill, camping car etc. The key stays put on a gas hose, so you wil never have to search tool box for the right key or pliers. Extremely useful…
Should fit all DIN 477 / JIS m22-14 / BS 341 Nr. 8 / W21.8-14 / .860" x 1/14 fittings with left-handed threads. Threads are designed slightly undersized for looser tolerances when printing.
Really simple knob/turner for a propane torch. Not all torches have the same little attachment point so you might want to check but it is a 5.5mm hole in the model.
The rust rings on the floor have always bothered me when using gas cylinders. Small pieces of wood under the gas bottle help, but they have to be realigned whenever you move the gas cylinder. These clip-on feet keep the floor clean and…
I made this to replace my broken dial on my propane heater after it shattered in the cold.
A base that will elevate your propane tanks off the ground or make their ride in a trailer a little more bearable. This fits 8 inch=203.2mm diameter *Warning* Very Tight fit
This is an updated model of my old one, it is a little less tight than the last one
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
The “Propane Tank Spacer Ring” design prints great. It is exactly what I was looking for. I added a simple leg design to lift the ring a little bit above the floor buy 7/16 of an inch. Note: this leg will be inserted little bit loosely in…
This took me less than 60 seconds to whip up. Guaranteed to Print (if your poop is in a group). If you are downloading this model consider this your sign to learn CAD. I am even throwing in the .f3d file from Fusion 360. Goodluck :)
This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…
After 3 camping disasters, with pots and pans tipping over, I've upgraded the base for my friend's propane stove. There are 2 models available. Possible improvements: print with minimal infill and a screw lid on the bottom to fill with…
Just a simple holder for 14 oz (400g) propane tanks. Print instructions Category: Tools Print Settings Supports: No
Just a simple dust cap for propane tanks used on grills. Meant to be printed with a flexible material. I used a 95A hardness TPU. Print instructions Category: Outdoor & Garden Print Settings Rafts: No Supports: No Filament: Whatever TPU…
I printed it using a 0,16mm layer height to make the piece extra sturdy, increase the wall loops (6) and sparse infill (40)
This propane holder is designed for quick, secure installation and everyday convenience. It features pre-drilled mounting holes compatible with common garage rack systems, but it can also be easily screwed directly into a wall, workbench,…
A cap that protects the needle of the Evike Propane Adapter.
This is an older version of my Propane Tank model, see the new version here: https://www.printables.com/model/1471223-propane-tank-support-v2 I modeled this to help raise my propane tank in up and allow my Mopeka Tank Sensor to have room…
I needed this to rise the tank above the mounting bolt head for the propane tank mounting tray also retain the Mopeka propane tank sensor centered on the tank bottom. The Mopeka sensors have magnets, but they are not strong enough and it…
It used to bug me that some lpg lines had built in handles and the ones on my kitchen did not so would need to grab a shifter each time I needed to replace them. So I did a quick design and a few tolerance prints to make this slip on hex…
Just trying to make a propane truck load that can be easily attached to a vehicle without having to alter vehicle. I used Gorilla glue to attach them.
I've got a few propane tanks, but it is easy to forget which ones are full - especially when secured to a trailer. These little magnetic marker tags make it easier to mark if they are full, partial, or empty. I suspect that the magnets…
Holds a lit propane torch so the flame is horizontal for hands free work.
Our propane heater knob broke and was too skinny to turn. I make a improved knob that is easier to turn and to push in
We use these 100mm disposable propane tanks for heating our camper trailer in winter. They are a pain as the roll around where-ever you put them. I wanted a secure holder for the trailer. This is the over-engineered result. Uses 8mm…
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
Propane bottle adapter A simple adapter to fit cluckOmatic's larger propane bottle stand. The adapter itself can be used solely as a small base alone, but it is far more tip resistant in cluckOmantic's larger base. No need to carry…
Ah, the end of camping season in Canada—a time to reflect on all the little tasks I should have done but didn't. One that kept haunting my backcountry dreams was creating a cap for my trusty propane-powered gizmo—the legendary "tiger…
I printed it out of PLA with 3 walls, 10% infill, and 0.2mm layer height. I'm sure you also can mix up the settings and use ABS or other materials. I got the idea to make this when visiting my grandparents, who needed my help with opening…
I needed a holder to wall-mount a camping propane bottle (the shorter, fatter green bottles). This does the job well, you can use two screws or two #10 bolts to mount this to a wall.
This is a base to help stabilize a small tank/torch combination, when you need to use it hands-free. This is for a tank 74.25mm in diameter. Although these small tanks will stand upright on their own, they tend to be top-heavy and prone…
Print with TPU and supports at .2mm resolution.
This is an adjustable holder for MSF-1a cartridge propane torches. It allows you to set the torch in any direction and angle for hands-off operation. You can use one or two stands, but two give better stability. To assemble, you will need…
DAMMIT BOBBY! Add to your collection with this 1:12 scale propane exchange station. I included my label template in the photos so that you add the labels to your build. I'm not sure if that will work but its worth a shot! Enjoy!
I got tired of my torches tipping over - lots of times I will be using them, lit, on a work bench but the standard bases are quite narrow and tippy, particularly if they get dinged at all. These are printed out of TPU and slide securely…
This is a revised version of my v1 tank support. I modeled this to help raise my propane tank in up and allow my Mopeka Tank Sensor to have room an not hit the ground. This 1 size seems to fit a larger array of tank sizes. I used ABS to…
A much easier to use hand nut for the top lid of a Camco Propane Tank Added two versions that use a heatset thread insert (M5x9.5) - https://www.amazon.com/ruthex-Threaded-Insert-Pieces-Ultrasound/dp/B07YSVXWS8/ref=sr_1_1_sspa?th=1
This is a dust cap mainly to protect the thread and seal of the intake nipple. Its threaded in 9/16-18 UNF and a clearance of .55mm to make it easy to seat, its not made to hold pressure. I printed it with a 0.4mm nozzle and a layer…
This print replaces the plastic intensity knobs on the old Coleman two burner propane camping stove. Unscrew the screw from the metal stalk, remove it and the thin circular metal "Off" plate if you still have it. Put the plate into the…
Got sick of hearing the bells chime or the tanks rolling around when I take them to get refilled. Now that problem should be solved. Now if we could just solve the problem of inflation.
This model securely stores two 1lb propane fuel cannisters. There are provisions for bungie cord loops over the bottles' top. Bolt holes are build it to secure inside your camper, truck cap, etc. They are sized for 1/4-20 hardware. This…
Knob for the Camco RV propane cover lid. The one it comes with is a bit small and is difficult to use. The thread is #10-32. A360 view https://a360.co/2pmbelL Print instructions Category: Replacement Parts Print Settings Supports: No…
This modular propane tank stand assembles without tools and holds the tank securely at campsites, picnic areas, patios and parking lots. Designed for a standard 20 Lb. propane tank, but also works with an 11 lb. "squatty" tank. The three…
A horizontal HO scale (1:87) 500 gallon propane tank for trackside communication hut emergency / backup power. Print in either white or gray PLA. No supports required.
A ring to help mount a disposable propane cylinder for camping. I printed two and then used quick ties. The small tabs used to squeeze the ring could be a bit thicker, but they work well enough. Category: Sport & Outdoors
I make shelves for propane and propane accessories, I tell you what. This is a storage caddy/shelf to hold a 1lb green propane bottle. This model was made to work with Multiboard, and attaches using the supplied "small, coin slot,…
Generic 500 gallon propane tank in HO scale *smoothed version has rounder sides and support braces are now triangle shaped added a version of the smoothed tank that contains a hollow and a drain hole if you want to resin print these…
I designed these TPU rings to protect the bottom rims of my camper's two 11lb propane tanks and to provide enough clearance to install a Mopeka Pro Check sensor on each tank. The Mopeka sensors require about 1/2 inch of clearance under…
Holds two standard 1lb propane bottles (Coleman style) upright and prevents them from rolling. Designed for drawer or cabinet storage, originally made for an RV, but works anywhere you want to keep small propane bottles organized and…
The igniter on my propane heater pushed through the panel the other day, so I did what any 3d printer owner does, whipped up a replacement panel in CAD and printed my own. This is specifically designed to fit the ProTemp propane heater,…
Propane Hanger SetWhen using a 1lb propane refill kit, having a 15lb tank upside down is natural... Right?? As a house hold we bought a 1lb propane refill set, nice shhhtuff lol. Wasn't wanting to drag things outside to fill takes, so…
WARNING: Hold the center piece while fitting the top on. I was forcing the top on the third one I've printed and the center piece broke. I was holding the base when it happened. I may add some tolerance to the connection to make it…
The propane base designed by cluckOmatic works great to keep my tank from falling over. I wanted to get it off my bench as I don't use it on a regular basis. This is a shelf to hold the take with the base. The pressure is against the…
To print this I used TPU on my Anycubic Kobra X. Standard TPU setting are sufficient for this print.
I created this for a garden weed torch propane hose, but it can be useful for many small propane appliances (e.g. Blackstone) or hoses where you want to keep dust, spiders, insects, and debris from entering the open connection. Unlike…
Customizable cap designed for a standard propane tank. ACME QCC-1 (Compressed Gas Association V-1) thread pitch and count with appropriate thread runout. I took the design a little further than a simple single color part; this model is…
Customizable cap designed for a standard propane tank. ACME QCC-1 (Compressed Gas Association V-1) thread pitch and count with appropriate thread runout. I took the design a little further than a simple single color part; this model is…
Box to hold the GasOne 50180-2 Propane Refill adapters https://www.amazon.com/gp/product/B08HGN35HV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Supports are required under the latch fixtures. The pin is printed with 0.12 mm Layer…
After downloading and making a propane cap for a 20lbs tank I thought it would be nice to protect the threads on my propane heater and propane torch that I connect to that tank. So here you go a threaded cap that will protect those hose…
When making a Boring Company style (not a) flame thrower, I needed to adapt the left-hand threads of the wand to a Burnz-o-Matic extension hose to use blue cylinders. I tested for leaks using soapy water, and it was leaking all over, so…
A holder for Oxy-Mapp or Oxy-Propane torch tanks with carry handle and a spot for lighter and torch when not in use. I designed this to fit two standard North America size Berzomatic style Hand Torch Cylinders. 14.1 oz Propane 16 oz Mapp…
I found this cap, which is pretty much perfect. https://www.thingiverse.com/thing:3164779 I also found this plug, which is cool, but not easily removable. https://www.printables.com/model/25391-1lb-propane-discharge-plug I decided to…
Pressing a propane hose on a coupling together with the press ring/bush is not easy because the rubber hose is deforming. TH=his vise /gripper is keeping bthe hose (6,3 x 13 mm) straight so it can be pushed on any coupling. Once pressed…
Modular rack system designed to hold 20 lb. Propane tanks horizontally on a shelf (or floor). Print as many cradles as required and connect them with the links.
I didn't like the aluminum spacers that came with the tank monitor set so I made my own spacer ring to lift a 20 lb North American Propane tank by 10mm for use with Mopeka style sensors. I don't have a Mopeka “Halo” to compare, but this…
A simple plug to maintain equalized pressure in waste Coleman-style 1lb propane tanks. NOTE: Installing this cap may or may not allow you to dispose of these waste items in your normal disposal stream. Consult your local waste authority.
Just my take on a stand to keep my mapp torch upright.
This is an add on base for your propane bottle into in order to provide for better stability. I had a banged up bottle that would not stand up on it's own, so this adapt was then made, worked out great. Category: Tool Holders & Boxes
Handwheel for use with the 30mm propane gas regulator fittings typically found on UK caravan's. New version available here: https://www.printables.com/model/490632-30mm-propane-handwheel-adapter
A cap for a one pound propane cylinder, used to keep it clean and protect the treads. It should be printed in TPU and without supports.
Simple cap keeper for camping gas / LPG / propane bottles (1.25/2/3/4 kg) that have a 3/8" LH thread and plastic valve cap - supplied with the Companion branded cylinders (Australia). The keeper securely presses into the plastic cap…
Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden
Cap for butane-propane camping tank. It is good to cover valve of your butane tank to protect it from getting dirty. This is simple cap designed for Coleman C500. But it should fit on any similar tank. If you want to modify this you can…
This print holds a 400 g propane or MAPP gas cylinder upright while in use. The cylinders are about 75 mm diameter. It has 3 screw holes in the base so that it can be attached to a piece of wood or bench to improve stability.
I tried ltlowe's spacer ring, but my tanks are a bit beat up, and I needed a larger gap. I also added some drain holes to help prevent rusting the tank bottom. Fits most common US 20#, 30#, and 40# tanks (all have the same bottom ring). I…
This is a clamp system that can be attached to any small tabletop so it can be attached to a standard 20 lb. propane tank. I used a ¾" thick tree cross-section that I bought on Amazon.com (it's a serving tray), but really any thin flat…
