6inch wheel collection coleman cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lost the wheel and axle assembly on a fishing trip. this not only made it cumbersome to move the cooler, the wheels…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Lost the wheel and axle assembly on a fishing trip. this not only made it cumbersome to move the cooler, the wheels act to stabilize the unit. Its a decent cooler and I couldnt toss it in the dumpster just because I lost the wheels.
bought a 24inch 3/8 in threaded bar and associated hardware for less than $4 and now have a unique looking cooler.
design 1 is 40mm wide. turned out to be too wide given the depth of the lock washers and nuts I bought. these would be perfect using a low profile or nylock nut.
the others are derivatives at 30mm which was perfect.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Filament: generic PETG any
Notes:
Originally printed in ABS, switched to PETG. both work well, but time will tell how they hold up.
4 perimeter layers and gyroid infill at 25% to aid durability.Category: Sport & Outdoors