1 / 1
Coleman Mach centrifugal blower wheel 1472a1191 — zdjęcie 1

Coleman Mach centrifugal blower wheel 1472a1191

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for A/C blower fan with equivalent dimensions.

Ocena
0 / 5
Polubienia
56
Pobrania
162
Wydruki
0
Wyświetlenia
1255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a blower that I dimensioned as a direct replacement for the Coleman Mach 8 1472a1191 centrifugal blower fan.  These fans are prone to drying out, becoming brittle and throwing shrapnel into your A/C unit.  Good to have one on hand for not IF it happens, but WHEN it happens.  I made the 2 parts mate, female and male so that they don't come unglued (like the stock version has a tendency to do.

I recommend printing with ASA 100% infill, obviously the higher the infill the longer it's going to last.  The male mate part will need bed supports.  You will need to tune bridging if you want to avoid any non-bed-only supports, for example: I had my hotend cooling for bridging set to 30%.

If you do print this in ASA, you can hang this part from the lid of a 5 gallon bucket with xylene at the bottom for a little while if you want to smooth the part.  I'm not sure what effect this has on longevity, but the xylene fumes do make it look nice.

Let me know in the comment section how it turned out for you!

UPDATE: I've had the original 100% ASA print in my unit for 3 years now running strong!

Tagi