1 / 3
Rav4 2-door Rear 6.5" Speaker Adapter (Gen 1 / SXA10) — zdjęcie 1
1 / 3

Rav4 2-door Rear 6.5" Speaker Adapter (Gen 1 / SXA10)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Truncated sides for clearance for the window/door, screw holes rotated

Ocena
0 / 5
Polubienia
9
Pobrania
57
Wydruki
0
Wyświetlenia
275
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

The rear speaker area of the 2-door Rav4's seems to be smaller than the 4-doors. The sides have been truncated/chamfered to clear the bracing for the window and door, which required the screw holes to be moved. 

 

128mm speaker cutout. Speaker mount holes are 154mm on center with m4 threaded inserts (I had to shorten standard sized inserts, but the shorter variants should work fine). I'd recommend using closed cell foam tape (~1/8, 3mm) on the back of the mount due to the offset from the plastic hardware for the OEM speakers. 

 

Model is for the driver's side, however if you forget to mirror one for the passenger's side it will still clear either way. Includes interior channels to (hopefully) add rigidity, although printed in abs/petg or stiffer should be sufficient.

Tagi