Simple Buddy Brace for MCP Collateral Ligament Injury
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplistic Buddy Brace for MCP Collateral Ligament Injury (both rings go on one hand)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
Simplistic buddy brace for those of you suffering from a MCP Collateral Ligament injury/sprain. 6-8 weeks is a long time to have to tape your fingers together so I whipped up this buddy brace so it could be worn all day. Put both rings on at the same time. This allows for mostly normal function of the hand while keeping the injured finger braced against the adjacent one.
Scale up and down as necessary to fit. You can measure in prusaslicer to get the size dialed in prior to printing. If you need to up size one of the rings due to proportion discrepancies cut the model into two objects using the cut tool and scale to meet needs. This model was built for my wife's measurements so your hand might be different.
Recommended filament and print settings: 95A TPU for comfort, 0.10 mm Layer Height, 0.4 mm Nozzle. I didn't need to print with a brim, just use a little glue stick on the print bed for adhesion and easy release