Modified Quietmode! Flashforge Adventurer 5M (AD5M) Back Panel w/ Buck Converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified “panel d” to incorporate a LM2596 Buck Converter case
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 289
- Wydruki
- 2
- Wyświetlenia
- 3605
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello fellow makers! I have added a case to the ”panel d” of the Flashforge Adventurer 5m Quietmode! Back panel that holds an LM2596 Buck Converter (with 56.5mm x 35mm pcb and integrated display). That way you can use cheaper 12v fans and adjust the speed.
https://www.printables.com/model/838021-quietmode-flashforge-adventurer-5m-ad5m-back-panel/comments
Both of these fit (HW-319-V6.0.1 printed on board/pcb measures approximately 56.5mm x 35mm):
https://a.co/d/6GfWJrW
https://a.co/d/bmF5oaV
Case is secured with 4 M3x16mm screws that cut their own threads.
I’m a complete beginner and did all of the editing in orca slicer, so it’s probably not perfect, but worked good for me.
I have now included the original panel-d with a switch as well as the incorporated buck converter case.
Happy printing all!