1 / 7
Shimano Shift Lever Repair Thingy GRX 105 Dura Ace — zdjęcie 1
1 / 7

Shimano Shift Lever Repair Thingy GRX 105 Dura Ace

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Thingy can help if the right lever no longer works (also a left version).

Ocena
0 / 5
Polubienia
5
Pobrania
52
Wydruki
0
Wyświetlenia
1121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The main lever support (part number Y63X80000, see photo) was missing or has fallen off my right shift lever, I don't know. The lever stopped working and no longer shifted to the larger rear sprockets. My Repair Thingy replaced the part and prevented the lever from bypassing and/or jamming the shift mechanism. I designed the thingy before I knew what the original part looked like, but it works too.

I have mirrored the part, it could help with the same problem on the left lever. R version for the right lever L version for the left.


It worked fine for a few hundred kilometers until I ordered and installed the new part. Maybe the repair thingy will help some of you.

Shimano part number of the missing parts:

Y63X80000 Main lever support R

Y63X80010 Main lever support L

 

Note: The Thingy is not attached to the lever like the original part but to the metal of the mechanism. I hope it can be seen well enough in the photos.
A little fiddly to fit, but possible with needle-nose pliers or tweezers and a little patience. Once you've done it a few times, it goes pretty quickly. I always have a spare thingy in my tool bag now. Thingy has managed the first few hundred kilometers without signs of wear and continues to work well.

I printed the Part in PETG with a layer height of 0.12 (PETG because of stability and UV resistance, but the part also worked well in PLA +/Tough PLA).

Tagi