Shimano Shift Lever Repair Thingy GRX 105 Dura Ace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Thingy can help if the right lever no longer works (also a left version).
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 52
- Makes
- 0
- Views
- 1,121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The main lever support (part number Y63X80000, see photo) was missing or has fallen off my right shift lever, I don't know. The lever stopped working and no longer shifted to the larger rear sprockets. My Repair Thingy replaced the part and prevented the lever from bypassing and/or jamming the shift mechanism. I designed the thingy before I knew what the original part looked like, but it works too.
I have mirrored the part, it could help with the same problem on the left lever. R version for the right lever L version for the left.
It worked fine for a few hundred kilometers until I ordered and installed the new part. Maybe the repair thingy will help some of you.
Shimano part number of the missing parts:
Y63X80000 Main lever support R
Y63X80010 Main lever support L
Note: The Thingy is not attached to the lever like the original part but to the metal of the mechanism. I hope it can be seen well enough in the photos.
A little fiddly to fit, but possible with needle-nose pliers or tweezers and a little patience. Once you've done it a few times, it goes pretty quickly. I always have a spare thingy in my tool bag now. Thingy has managed the first few hundred kilometers without signs of wear and continues to work well.
I printed the Part in PETG with a layer height of 0.12 (PETG because of stability and UV resistance, but the part also worked well in PLA +/Tough PLA).