651 models
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
The CF-105 Arrow was a supersonic interceptor developed in the 1950s. I love this beautiful plane and I felt a need to model it, despite having no idea how to model such complex shapes. Please read on to learn some history and to learn…
A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
This is a 10 inch rack mount for a TP-Link SG105. I have printed it whit ABS. No support needed, I have added a custom support in the model. If you need a 10 inch rack mount for a different brand or you just need a cover plate I will…
If necessary, the model can be cut in the slicer and the scale of the model can be increased.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** What's the strongest split key ring out there, gram for gram?…
Mount for TP-Link TL-SG105 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.
This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…
This model is compatible with the lego system.
The switch can be mounted under a table, on the wall or wherever you can fit 2 screws in it If you are looking for the same holder for the 8 port switch: https://www.thingiverse.com/thing:3278568 Print instructions Category: Computer…
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
These are some remixes I've created from the great sliding puzzle by Nikolaos Babetas . I've added a horse head (reused it from my horse bookmark ), a Saturn style planet (from my Saturn bookmark ), a pictograph of BO 105 (the best…
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
Decided to make a simple wall mount in OnShape for an old Millenium Falcon lego set I've had collecting dust for years on a shelf. Lego Set 75105 This was intended to be a rough draft but it worked well enough that I didn't bother making…
My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…
I wanted to make a simple case for the smallest ESP32C3 that I could find for use within a Mitsubishi AC. There is a CN105 port on several Mitsubishi ACs that allow you to control the unit remotely without spending $100+ on an official…
Discord for updates: https://discord.gg/yfdSb Do take note the Brown Stand on the other AMX 13s is not printed for this model. Some parts need supports Tank Antenna used filament Printed using Bambu Matte PLA
It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
Wip. Replacement for cabin filter cover Renault Laguna 3 52410566. Please notify me in the comments about inconsistencies. Print Settings Printer Brand: Tronxy Printer: Tronxy X5SA/X5ST/Pro/2E/D01 Plus Rafts: No Supports: Yes Resolution:…
Adapter plate for Garmin 1050, pushes 1050 forward so you can use your current mount. I printed these Garmin male mount side down with supports. The red model in the picture is PLA during prototyping, final model (black) I used PETG. I…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
A modular 19-inch rack mount for the TP-Link SG1005P. Also works with the TL-SG105. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
Can be printed all at once or in pieces, depending on your printer size. The Fuze can be a little tight going on/off the first couple of times. Be patient and work the threads back and forth. It'll eventually move nicely. I suggest using…
This is a remix of this mounting plate by asp55 on Thingiverse. This one has the inserts a bit closer than the original to fit newer TL-SG105 switches. Just use double sided tape or whatever you want to mount the plate and attach the…
Originally published here: Samsung Galaxy A10 a105 case by tato_713 - Thingiverse This is the case for the Samsung A10; for the A10e see this post . Some of the models are designed for rigid materials and others for flexible ones. The…
This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…
UPDATE: 25/02/2025 I have updated the design, to compensate for the MicroSD card in the Raspberry Pi, and also adjusted the end of the router back to fix some occasional XYZ errors while printing. U1 10" Raspberry Pi 4 and TL-SG105 Rack…
I designed this holder for mounting the TP-Link SG105 under my height adjustable desk. I used 2xM3 screws with fitting nut and 2x M3,5x16mm wood screws. I placed the nut inside the Screw-Terminals of the switch and fastend the screws…
This is an Easy to Print Small Holder for the Netgear GS105 Lan Switch I was Searching for a Similar Model in the Web but didn't Find anything (maybe I searched not good enough) well whatever, I decided to just make my own, the Result You…
TP-Link TL-SG105 10-inch Rack Mount 🖥 Keep your TP-Link TL-SG105 securely mounted in any standard 10-inch rack! This remix adapts the original 8-port TL-SG108 design to fit the 5-port TL-SG105. It adds a robust latch rather than relying…
1U rack shelf for 8 port ethernet switch tl-sg105 print settings: 15-20% infill 0.2 layer height
Concerning tool purchases, I make compromises when a machine or tool is not in use very often. Hence I bought a cheap glue gun from Parkside (LIDL). However, when it comes to having a tidy workplace and structured tool organization, there…
So I got a new GPU on Ebay and it isn't coming with the regular size GPU bracket, so I figured I could design my own by modifying and referencing models done by Gushie, rasarmg and pankomputerek! I will fine tune the measurements once I…
Wall and ceiling mount TP-link TL-SG105 made in thinkercad 3mm thick walls
Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…
The Garmin 1050 is larger than previous models and does not fit the standard computer mounts. This adapter moves the bike computer 10mm forwards and 6mm upwards. Allowing it to be mounted to standard computer mounts. I printed mine in…
Wall mounting bracket for our TP-Link TL-SG105 network switch.
The Avro Canada CF-105 Arrow was a twin-engine, delta-wing interceptor proposed to be the primary interceptor of the Royal Canadian Air Force in the 1960s. Its development began in 1955, and the project was canceled in 1959 with only 5…
A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…
I didn't see any lens bins for gridfinity for these smaller Canon RF lenses so I modeled simple 2x2 bin for them. It's designed for and tested with the Canon RF 16mm F2.8 STM and RF 50mm f/1.8 STM lenses, but it should work for any lens…
This model is compatible with the lego system.
These caps are a copy of a design by another company, which made these using an injection moulded process. They fit cells with top dimensions 130x36mm. This includes 75Ah, 90Ah, 105Ah cells and probably more. These LiFePO4 cells are…
Needed something to help stabilize the airbrush in my hand, fits Badger 105, Nasedal airbrush & Fengda FE-183K AB Handle 2 Should fit any body that is about 10.5mm to 11mm and and air intake of 8.5mm to 9mm AB Handle 4 Should fit any body…
As a special request to Criag. This was all I could find buddy. Hope its what your after : ) Good luck Cheers Jace
The SDrive-MAX is an amazing device for your Atari 8-Bit; think of it as an unencumbered, open source, enhanced version of your SIO2SD. For all its awesomeness I felt the available case designs were letting it down a lot. I’ve been…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
An easy way to mount you TP-Link switch to the SKADIS pegboard
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…
This is a mount for a D-Link DGS-105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…
Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
Front hitch for the Fendt 1050 Vario model from Bruder.
This is a mount for a TP-Link TL-SG105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…
This model is compatible with the lego system.
Case for Atari 1050 / XF551 floppy power supply unit. Krabička pro napájecí zdroj disketové jednotky Atari 1050 / XF551. Print instructions english text bellow ==== CZ ============ Napájecí zdroj pro floppy Atari 1050 / XF551 Jde o návrh…
Velocity stack for a Lada carburator. I recommend ABS/ASA/CF NYLON for printing.
This model is compatible with the lego system.
You need zipties for the power brick. The switch slides into the mounting brackets and locks itself in place. There is also a version for 19 inch racks:
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
This is the holder to attach this awesome Featherboard to the Scheppach HS105 table saw, might also fit on other table saws
The gun moves up and down and rotates approximately with the same range as the real gun. All holes and inserts must be filed clear of any flash/brim/support material. Most parts are friction fit, but some need to be glued. Assemble using…
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
Why scoop endless scoops of coffee to get your coffee maker going? (particularly office coffee makers??) This scoop has a volume of about 130mL which equals about 8.8 Tablespoons. If you have a 14 cup coffee maker this means you only need…
A custom-designed adapter ring. This modification allows you to mount 6 blades instead of the standard 3. Materials Needed: 3 x M4 x 8mm screws 6 x M4 x 6mm x 6mm inserts Printing Specifications: Material: PETG Infill: 100% Layer Height:…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
Radnabe für RB 35 Motoren (6mm Achse) für die Standard Bruderfelgen des Models Fendt 1050. Version 5: für M3 Schrauben (2,6mm Löcher) inkl. Zentrierung und Fase inkl. Wellenfixierung mit Madenschraube (2,5mm Bohrung)
UPDATE: Reworked also to fit the F-91W. Print Setting Material: TPU Layer Height: 0.20mm I printed with Overture High Speed TPU 95A.
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
This is a fictional narrow-gauge diesel locomotive LSM 03 in H0e scale. I designed and modeled it from scratch in SketchUp. Done to be printed in lcd resin printers. Just add support. Designed to fit the Kato 11-105, 11-106 or 11-107…
Protective box for Xiegu's CE-19 interface, used for the Xiegu G90 and X5105 HAM radios. Print either bottom or bottom ONLY AF-CON. The latter only has the Radio and AF-CON holes open, the other has all openings. The box is printed so…
Modeled and printed this back in the summer of 2022. Sadly, the battery have already degraded significantly when I finished modeling & printing this but I still see value in this model I made. Remix it on Onshape:…
Coin designed for Pokemon Go community day Classic. Coin reflects selected Pokemon for community day July 5th and 6th 2025. Front shows Eevee and back shows the Eevee evolution. Glue coin halves together after printing. Paint if desired.…
This is my highly detailed CF-105 Avro Arrow CAD model. If you do go on to print the model, please post a make. Enjoy the print! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20 Infill: 20%…
For whatever reason Dewalt didn't include any way to mount this charger on the wall. I've been thinking about an elegant way to wall mount it but couldn't find one that satisfied me until I had a 3D printer. While looking for existing…
I stripped my oem gears and couldn't get replacementr parts so I just printed them. Made prototype out of PLA and it seems plenty strong. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…
Printed in petg, the more perimeters, the stronger it will be. I suggest inserting m3 bolts in the round protrusions as in the photos, otherwise they may break, also you may use a bit of glue to make the whole thing non-separable… I used…
boat or catamaran 42105 2 models in 1
Bližší informace o modelu na stránkách Lega nebo v aplikaci LEGO Builder. Zkompletováno z různých zdrojů na internetu, popřípadě navrženo ve FreeCadu.
Dieser Remake hält durch doppelten Luftspalt dein Bier länger kühl.
Needed to fill the holes in the cruiser left over from the previous owner not installing switches correctly etc. I tried to make it match the curved surface, however that was too hard to print so decided on a flat plate. Use this as a…
This model is compatible with the lego system.
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…
I used this motor: https://www.amazon.com/dp/B0F21RW7MJ?ref=ppx_yo2ov_dt_b_fed_asin_title The screws to mount the fan axle and motor are M3 screws. I'd recommend get a M3 Screw set. I used a shitty Kingroon 3kps Pro, the print quality is…
A 10-inch rack mount for the TP-Link TL-SG105-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings…
Wanted to use in my 10-inch rack setup since I need the extra space under the Pi for an errant tall PoE HAT in a 1U rack below where this rack will be installed. I subtracted some of the material from the print model surrounding the…
I purchased the Odyssey x86j4105 single board computer (sometimes called re_computer) and found very few cases were available for it. There is a $15.00 dollar metal case the manufactures sell and Akash17's Thingiverse record. But I wanted…
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
Mounting Plate for TP-Link TL-SG105 switch. Material: PLA+ Infill: 20% Support: Touching Buildplate
There are many webcam mounts available - unfortunately, I couldn't find one to raise a Logitech Brio 105 on my DELL U2722DE - so I measured and constructed my own :) I printed sideways with supports, see pictures
Print in PLA without Supports.
This model was made possible by AMB by providing the CAD files for the router so I was able to work with a boolean substract and make a mount that is a perfect fit. The top part should be printed oriented on the top. I left it in the…
