5020 Fan Blower Mount ( Intake outside ) - Creality Ender 3 V3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blower Fan upgrade for the Ender 3 V3 SE.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This replaces the stock 4010 Fan with a 5020 Blower.
Pushes more air, but be advised, noise level will increase.
You'll need (2) M3x20 Flatheads with Nuts, or M3 heatset inserts to mount the Fan and the original (2) M3 Flatheads to mount the Shroud.
Fans I used: https://de.aliexpress.com/item/1005007594043332.html?spm=a2g0o.order_list.order_list_main.87.405c5c5fhklcVk&gatewayAdapt=glo2deu
(gdstime 5020 Blower)
Note: The Printer uses JST 1.25 connectors; You can get them here: https://de.aliexpress.com/item/1005004732865407.html?spm=a2g0o.order_list.order_list_main.72.405c5c5fhklcVk&gatewayAdapt=glo2deu
Tested:
NOT TESTED YET! - might have some dimension errors!
Upcoming updates:
- Fixing beehive structure (to be actually a hive)
- Adding different beehive version to match Jims prints
- Adding cutout for fan assembly plastic
- reducing overhead on ends
Upcoming revamp ~ April 2025:
- Add small (optional) Cover to the fan
Made by: AI-Krieger (Me)