Replacement Thread for Brooms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a simple replacement thread for brooms.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — NoDerivatives
This is just a simple replacement thread for brooms. If you use a broom, you are probably familiar with this problem. The thin plastic thread, especially on the metal broom handles, breaks off and you have to buy a new broomstick. Unfortunately, this happens very often, even with new broomsticks.
This simple replacement thread was designed by me to replace the broken thread. It fits most standard metal broomsticks and most brushes.
It has been designed for broomsticks with a diameter of up to 22 mm (0,87 inch, 55/64). If you need a larger version feel free to contact me.
UPDATE:
14.04.2025 I also added a version for 19 mm broomsticks today (.stl and 2 x .3mf for PLA and PETG included.)
Important UPDATE! Please print with 100% infill and „Rectilinear“ infill pattern!