Liczymy pasujące modele…
Remix of SD-3Ds broom bracket with added screw holes. Please also check the original posting which has been recently updated. This remix here also received the stabilization add in V2. Which SD-3D implemented when touching the original…
Should fit most broom threads, maybe plungers as well. Test file included. Print upright no supports. Bed slingers might want a brim.
Vertical foregrips for 1913 rails modeled after the KAC VFG. No bolts needed, just align the grip body on the rail and tighten the grip screw. Print 1 standard or stubby grip body, and 1 respective screw. Print Orientation The STLs are…
Lego compatible broomstick accessory for Lego Minifigures
Halloween Decoration - Witch on a broomstick
This is for Peggy Perfect threaded broom Easy to print, I use NoBuFil PCTG Alu Gray with 0.4 nozzles, 0.2 layers and variable heights 6 perimeters and only 25% filling gyroid Happy printing and a happy wife Dies ist für Peggy Perfect…
Made a wall mountable for my outdoor brushes, although I think this model can be used to hang other stuff inside/outside. made two holes for centering the screws for mounting in v1 Made two bigger holes for v2 material i used was petg…
The thread is set to fit 3/4" ACME (see pictures), wich is a standard broomstick thread at least in europe. The thread has been carefully set though a LOT of dimension iterations. A simple version is uploaded to edit. A 120º full bracket…
Universal Broomstick Hanger Inner Diameter: 20mm Outer Diameter: 50mm Scale to your needs. If you like it, so give it a like here on thingiverse. And watch out for my other Designs: https://www.thingiverse.com/pakkko/designs Universal…
This model depicts Baba Yaga , the mythical Slavic witch, soaring through the air on her broomstick. It’s designed for 3D printing and can be used as a Halloween decoration, tabletop miniature, or fantasy collectible . You can print it…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
We needed to stake a broomstick handle into the ground for a signpost we were making. For best results, print it ON ITS SIDE with some support. It will want to break apart if printed "pointy side up". For more about the signpost:…
Broomstick Coathanger Broomstick is 25mm Google: 25 millimeters = 0.984251969 inches Scale according your needs. I didnt have conical screws, but I made a chamfer for it for a more universal mount. V2 created on receiving feedback from…
This will allow you to use a standard broomstick or paint pole on a normal swiffer. the normal handle is super flimsy and I use the swiffer wet pads that can sometimes need some down pressure to scrub off a mess. using a normal broomstick…
A remix for broom sticks of 23mm diameter. Includes fusion360 file to adjust to your broomsticks
Printed in ABS at like 20% gyroid infill with 2 or 3 perimeters and it feels pretty strong
if the screw breaks you have to change the whole stick, or use this spare part. The screw is tapered, so it should fit all brands.
It's a modular planter stand that is made only from 3D printed parts and standard broomsticks. This stand can be adjusted and designed as you wish by simply printing more parts or adjusting the height. For easy assembly I suggest to first…
I decided to print a TPU ring for the Gravity Broom Holder because my Broom was slick and it wouldn't catch. The orginal designer mentioned using a rubber band but I thought using TPU may last longer. I did try printing the gear in just…
Two spare broomstick screws for 23 mm stick. Use a wood screw to secure the part (pre-drill hole).
This is a Complete set of Piece in order to build a Yagi-Uda antenna that is very lightweight and portable. complete with a pistol grip handle and separate piece for the BNC connector [not pictured]. there is even a cut-out for your…
Remixed version without a hanging hole.
I had the original grip design break when using it as a pump grip on a nerf blaster, so I made this version where the neck is solid and it uses a bolt to secure it to the rail, and the inside becomes a storage container. Hardware: M5 x…
A remix of Broom Handle Bracket/ Broomstick Mount to accommodate 23mm width broom sticks.
Broomstick connection reinforcement for 25mm stick.
Mesiac som vytlačil z PLA žiariaceho v tme a čarodejnici z čiernej PLA. V tme pekne svieti.
Adapter for german brooms. The thread could have been a bit smaller. The insert for the broom could have been a bit wider. Please measure the diameters before printing. Feel free to leave your comments and I will try to make different…
I made broom for dummy/ lucky 13 , there are two different brooms. Choose which one you like and get them cleaning.
Simple 2D wall art - A Witch on a Broomstick If necessary, you can set your own size. With a layer height of 0.2, you only need to respect the height of the Z axis (0.6 mm - 3 layers - only 0.4 mm - 2 layers is also possible). Feel free…
The stick of my workshop broom has come loose. Then I realized that I don't have a matching Prusa design broom yet. Due to the filament consumption not cheap but a must for a Prusa printer Der Stiel meines Werkstattbesen hat sich gelöst.…
This pic grip requires M3 hex head screws and accompanying nuts. If you are using the broom stick as a primer I recommend printing the handle horizontal to the table and using 5 Walls 5 Top and 5 Bottom with 20% triangles infill. ( I use…
Astoroth Star amulet (Bedknobs and Broomsticks prop) just as seen in the movie.
@basiclee3d 's broomstick bracket as seen on tiktok - used as a filament shelf for storage and filament spool holder ! Designed for a 1 1/8" diameter broomstick and M4*30mm wood screws were used in the video. The broom stick should be cut…
This is just a simple replacement thread for brooms. If you use a broom, you are probably familiar with this problem. The thin plastic thread, especially on the metal broom handles, breaks off and you have to buy a new broomstick.…
layer 0.2, first layer 0.2 at a height of 1 mm (layer 5) pause or change the material to another color. I used a combination of yellow in the background and black for the information graphics/text It is of course possible to change the…
I was originally going to remove my old broken broomstick hangers, but realized I could simply re-use the channel mount and add a slotted extention to the gravity broom holder. This re-mix includes a channel underneath to slide over…
I wanted to have a Trident Sceptre for a Poseiden costume. I trialed and errored the threads to screw on a standard broom stick acme thread (¾"-5, I believe). I had found the shape elsewhere, but it was a pendant/medallion, but I wanted…
I didnt liked all the wallmounts for brooms i found online, so i made a new one. Its a wallmount for a broom. I even added one for smaller brooms, or broomlike appliances. Did i said the word broom already? Also, if the day comes, on…
Easy to print Witch in broomstick Pla Tpu petg abs are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
With this tool you can place broomstick an the wall
[EN] With this hook you can hang for example a lamp or Christmas decoration without using a ladder. It fits on a broomstick with 24 mm diameter, and can be fixed with a zip tie. (details in the drawing) FreeCAD file included for…
Here is a small honeycomb plant support table, made with Ø24 broom handles, I put several handle diameter versions along with the STEP files for easier modification. You can use any size broomsticks you want. Enjoy
Compatible with standard brooms and paint poles (threads ¾ inch in diameter, 5 threads per inch AKA Acme form)
Created with the assistance of AI, then refined and optimized in Cinema 4D. All renders were personally made in Cinema 4D. A finely sculpted 3D model of an elderly witch holding her mystical broom, radiating wisdom and mystery. This…
stores a broomstick flat and safe at a wall
Weil mir der Staubsaugerhalter so gut gelungen ist hab ich für den Besen auch gleich einen Halter entworfen. Der Besenstiel hat einen Durchmesser von 26mm. Gedruckt hab ich diesen stehend mit Stützstrucktur. Because I liked the vacuum…
This cap is created for the Coronet fix-o-mat broomstick. It fits in to the stick an has a strong hold. It is bossinle to place rhis on a hook This Kappe habe ich für den Coronet fix-o-mat besenstiel designed, Die Kappe passt in das Rohr,…
I didnt liked all the wallmounts for brooms i found online, so i made a new one. Its a wallmount for a broom. I even added one for smaller brooms, or broomlike appliances. Did i said the word broom already? Also, if the day comes, on…
Added 5mm to fit a torkscrew
stores a broomstick flat and safe at a wall
The sleeve inside diameter is slightly oversized - achieve a very tight friction fit by wrapping the broomstick end with 1-3 layers of masking tape
I had trouble with the original due to it's short reach, so now i can just add however long stick i want…
A decorative solution for using simple broomsticks as legs for a table. The design is strong and sturdy and can be used with 22/23mm broomsticks.
I can't buy tomato stands right now, but I can buy broom handle. I needed a way to anchor them in the ground so I remixed a spike. Added the broomstick thread, and narrowed it to use less material and print faster. Holds in the ground…
A 3D printable robust, durable and efficient Crevice Weeding Hoe designed to mount to a standard threaded broomstick, extension pole or paint-stick to remove unwanted weeds from the crevices in sidewalks and driveways and any other narrow…
The 'Silk Witch on Broomstick' is inspired by mystical Halloween themes and classical witch imagery. The elegant design combines feminine power with fantastical elements, showcasing a witch elegantly sitting on her broomstick. This figure…
I've made this broomstick clothing shelf mount (with the letter M inside) for the ikea värde (Wall shelf, white, 50x140cm) We use the Wall shelf in our baby's bedroom, the broomstick is a nice addon to hang baby coat hangers on. The mount…
Added support to the Dryer Sheet Swiffer that was created by Julius 3E8 to be used with a standard broomstick handle. Only changed the mount for the sweeper pole. For all other parts see the original model used.
🧹 Broomstick Inspired by Nimbus 2000 – Test STL File This is a free test file – a simple alternative model shared for preview purposes only. The full, detailed broomstick model inspired by the legendary Nimbus 2000 is available here: 👉…
Created this last weekend when we needed a small dustpan for cleaning up and shops were closed. Including some finishing work it took only about 30 minutes thanks to tinkercad and printed out totally usable :-) If you need another size or…
Simple 2D image of a Witch on a broomstick
I started creating it because drying diving booties is more efficient when they are hanging upside down, but ended up creating a whole vertical rack for all the small diving equipment. And once it was done, it turned out useful for drying…
Disclaimer This is my personal entry for the Contest Theme : Print Tables. If I win the printer then it will be for personal use which will include creating more projects and workshops like the current one for the High Tech Lab. Below in…
THIS IS NOT A FIREARM OR FIREARM COMPONENT, NOR CAN IT BE CONVERTED TO BE SUCH. THIS IS A TOOL TO ASSIST WITH PAINTING OR APPLYING HYDROGRAPHICS I needed a better way to control an AR platform pistol or rifle while painting it and…
This is a remix of the wall mount from @Sven_2545242 to fit with a 26 mm broomstick I recommend to print the main part with the flat (front) side down, 5 wall loops and 50-70 % gyroid infill. No support needed. Please also see the…
There is a 2 hold design as well if you are worried about it rotating. Holds things with a diameter up to 35mm.
I used this at the back of my enclosure to hold my filament, but feel free to use it anywhere.
Don't print the way the part is oriented. Flip it up on its side so that supports are unnecessary. I printed in PLA with 10% infill, with 3 perimeters, and 0.2 layer height. It's slip-fit for a broom handle we have in the house. It has a…
Simple solution for van and SUV owners to reach windows. To assemble you will need 2 M4x15 or M4x20 screws and 2 M4 nuts. Printed from two parts to be more durable and avoid using support. Has 2 versions of base and scraper to choose both…
The hook itself was printed in ASA, other parts in PLA
This is a small broomstick-vertical foregrip for ARCA style handguards. There are two versions for ARCA with or without the extra thickness on the bottom that most rails have. Some lightweight equipment like camera mounts and clamps have…
This model fits 50mm barbell weights and corresponding clamps. I have uploaded three versions for different diameter bars. I have a 26mm stick which it fits snug on. I used glue and a screw at the end. No supports needed.
A decorative solution for using simple broomsticks as legs for a table. The organic design is strong and sturdy and can be used with 22/23mm broomsticks.
Simple print no support, and I made it in PLA, but I guess PTEg would work too, I needed a handle, so made it, and wold like to share the idea, not 100% sure it's unique… But could not find the same. 2 versions… I printed the 5mm base…
👕 Upcycled Broomstick Clothing Rack Connectors Transform ordinary broomsticks or dowels into a custom, super-sturdy clothing rack with these simple 3D printable connectors! This sustainable DIY project uses readily available wood sticks…
Introduction Feeling like a witch? I got you flying! With this Magical Broomstick you can show up at Carnival, Halloween, or a Cosplay party with style! ...And the best part? It is all DIY! How to make your own broomstick What you need to…
Used to mount a broomstick to a container to be used as a spool-holder and dry box combo.
Inspired by this model , I wanted something "quick and easy" to print and - above all - without having to waste time with supports. So I quickly designed this: it's made of two pieces that won't require supports and can be printed at…
XL wall bracket e.g. for brooms or other items. To be mounted with screws or double-sided adhesive tape. Integrated support, mouse ears attached for better bed adhesion.
XL wall bracket e.g. for brooms or other items. To be mounted with screws or double-sided adhesive tape. Integrated support.
A Spoolholder using a Broomstick of 28.5mm diameter.
Wall mount for broomstick with 24mm diameter. We have print two holder. We have use this ivy from Amazon: https://amzn.to/3YqTbJI But you can use it from anything else. The fairy lights were buy at Action (Germany). Print Settings Rafts:…
I needed a stopper for my filament spool :)
After about one and a half years of faithful service my old filament holder thing finally broke due to me overloading it and using it in an orientation it wasn't designed for. (the old holder https://www.thingiverse.com/thing:1427114 ) So…
With these models and using standard broomsticks and wooden board you can create 3 legged stand for your needs. Found cheap 23mm (15/16in) broomsticks locally and decided to make speaker stands. I did quickly modify the models to have…
Screw Broomstick Solided Remix
Upcycle a broom stick into a telescopic microphone stand Standard telescopic broom handle with 24mm thread Base with 27.2mm hole for 27mm interference fit with broom handle (Remove the hook if present) Render Printing Microphone Clip and…
Halloween Flying Ghost on Broomstick 👻🧹🎃 A playful 3D-printed ghost with a witch hat, happily flying on a broomstick! Its cheerful smile and friendly design make it a fun addition to your spooky season prints. ✨ Features: Cute ghost with…
Headphone hanger made with 23mm diameter broomstick. Screws are hidden underneath the broomsticks. Length can be chosen according to the size of the headphones you have. Optionally you could sand a notch in the end to wrap the cable…
After a weekend of elemental fun I wanted to find a place for my roommate's tattered air nomad wing glider, so I went to work creating a simple mount to stick it to the wall. It is printed in two parts and does not need supports, though…
3D Print Summary: Broomstick Repair Sleeve (13mm) A quick, durable, and functional print designed to fix a broken or weakened broomstick with a 13mm diameter . Instead of throwing away a perfectly good broom, this sleeve reinforces the…
Each section is 215.20 mm (8.47 in) long, so about 6 sections make up a standard broomstick. Use a standard broom head. The nubs slide into slots to keep the pieces together when disassembled. When linked via the nubs/slots, a group of 6…
I was sick of having to get up on a ladder every time I needed to open/close the gas heating vents in my house, and was told to just shove a broomstick up there and it'd do the trick. It did not do the trick. Mixed these two models…
Ladies and Gentlemen, Boys, Girls and possibly a cyborg. This is the ONE and ONLY Print in Place Extending Witches Broomstick! (i think?) Extends to 72CM when printed at 255mm height! Here is my rendition of a version of a remix of an…
to make this, please pause the print mid way before the bottom finishes or before it starts making the top and place the magnet inside before continuing
This is for Peggy Perfect threaded broom Easy to print, I use NoBuFil PCTG Alu Gray with 0.4 nozzles, 0.2 layers and variable heights 6 perimeters and only 25% filling gyroid Happy printing and a happy wife Dies ist für Peggy Perfect…
🇩🇪 Beschreibung (für 3D-Druck-Seite): Ständer für Klebefliegenfalle – mit Besenstiel verwendbar Mit diesem praktischen 3D-gedruckten Ständer kannst du handelsübliche Klebefliegenfallen frei im Raum aufhängen, ohne Decke oder Wand zu…
![Broomstick Spearhead [Kenteclaat Remix] (Modified threads)](https://media.printables.com/media/prints/586177/images/4677532_d3bc5908-5c4f-4b0a-b09f-c545092056fc/pxl_20230915_022558869mp.jpg)
