Broom Bracket for threaded broomsticks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for threaded broomsticks. Have a basic version to edit and a proper bracket version.
- Ocena
- 0 / 5
- Polubienia
- 91
- Pobrania
- 289
- Wydruki
- 1
- Wyświetlenia
- 688
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
The thread is set to fit 3/4" ACME (see pictures), wich is a standard broomstick thread at least in europe. The thread has been carefully set though a LOT of dimension iterations.
A simple version is uploaded to edit.
A 120º full bracket version is uploaded for a wooden broom brush I had. 73 mm between holes. Add print supports for just the tilted flat base so the thread is printed vertically, as in the model. Take care of broomsticks that may be thicker just above the thread, which will not fit well on this model.
I recommend 20-30% infill for proper stiffness.