The Mummy Inspired Key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Key inspired by the 1999 movie the Mummy
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Inspired by the 1999 movie the Mummy is my take on a twist key. Twisting the two halves causes the spring loaded latches to deploy which can then be used as a key. I have included two sample key holes which can be added to a locking mechanism of your own design. You may choose from either the Mummy inspired design or a plain design if you want a different style. I would recommend storing it in the “open” position to avoid fatiguing the springs. All parts may be printed without supports, I did manually paint supports for the “top” part where the spring goes.
Assembly Instructions
- Place the 3 latches into the bottom in the fully extended position
- Place the mirrored spring onto of the latches, you may wish to use a small amount of glue to hold the spring in place
- Place the cap on top of the spring, again you may wish to use a small amount of glue to hold the cap in place
- Place 4 magnets into each half, making sure the two halves attract
- Holding the latches closed join the two halves together with all magnets aligned