The Mummy Inspired Key
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Key inspired by the 1999 movie the Mummy
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
Inspired by the 1999 movie the Mummy is my take on a twist key. Twisting the two halves causes the spring loaded latches to deploy which can then be used as a key. I have included two sample key holes which can be added to a locking mechanism of your own design. You may choose from either the Mummy inspired design or a plain design if you want a different style. I would recommend storing it in the “open” position to avoid fatiguing the springs. All parts may be printed without supports, I did manually paint supports for the “top” part where the spring goes.
Assembly Instructions
- Place the 3 latches into the bottom in the fully extended position
- Place the mirrored spring onto of the latches, you may wish to use a small amount of glue to hold the spring in place
- Place the cap on top of the spring, again you may wish to use a small amount of glue to hold the cap in place
- Place 4 magnets into each half, making sure the two halves attract
- Holding the latches closed join the two halves together with all magnets aligned