Radxa X4 Case Top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to make a case top similar to the RPi series, but needed a few...alterations.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is a variation of basically all of the basic RPi/SBC cases out there. I needed to make one specifically for the Radxa X4, with a cutout for a 2280 NVMe drive. I wound up cutting out a sizeable piece for other reasons.
I included a stripped down file of the X4, in case anyone wants to further remix/refine this design.
A normal Pi/SBC case probably could work, but I made my top just a little slimmer around the ports, and a lower tolerance to them, to help reinforce them. Ask anyone why that would be a good idea, and they'll tell you why it is.
Supports: None
Filament: Any (I used clear Jayoo on this one)
Infill: Any
Resolution: 0.2 (or equivalent)
Nozzle: 0.4