Claw Hammer holder - Multiboard / Multiconnect (no text on attached model file)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Claw Hammer holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Claw Hammer holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text.
Works for any generic claw hammer from 16 to 20 oz
This holder uses Multiconnect connectors. 2 of them is sufficient.
Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model locks the connectors securely in place.
I prefer these connectors. Thanks @JLokrin!
Printing: Model is in the right orientation, does need support(s)! I used Tree(auto) in my slicer and this worked very well - see attached screen print from my slicer.
You also need good bed adhesion - use a Brim if necessary.