Roofing Hammer (German design) holder - Multiboard / Multiconnect (no text on attached model file)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roofing Hammer holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Roofing Hammer (German design) holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text.
This holder uses Multiconnect connectors. 2 of them is sufficient.
Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model locks the connectors securely in place.
I prefer these connectors. Thanks @JLokrin!
Printing: Model is in the right orientation, does need support(s)! I used Tree(auto) in my slicer and this worked very well - see attached screen print from my slicer.
You also need good bed adhesion - use a Brim if necessary.