1 / 4
Kingroon KP3S Pro V2 BLTouch mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kingroon KP3S Pro V2 printer BLtouch sensor mount, in the standard mount of the inductive sensor
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Typically, the sensor is attached to the casing, the peculiarity of this project is that the sensor is attached to the inductive sensor, which is installed from the plant.
This mount does not interfere with the casing and allows minimizing the length of the wires.
Model options
For additional rigidity, I added a ledge that can interfere with adjusting the BlTouch sensor height. I added 3 options with a ledge of 1mm, 10mm and 15 mm. Choose a length that is more suitable for you.
Printing
- Material: PETG, ABS. PLA is not recommended due to low temperature resistance
- Supports: YES
- Infil: 100% (for strength)
- Position: As in the photo
Installation
- Remove the standard inductive sensor
- Screw 1 screw mount to Bltouch Sersor (no need to tighten the thread)
- Install the mount in the standard mount of the inductive sensor
- Move printing head so that the nozzle rests on the bed
- Comers the mount so that the needle needle up is 2-5 mm above the bed
- Tighten the screw of the inductive sensor to fix the mount
- Flot with a second screw mount and BlTouch sensor
- Tighten the first screw (from 2nd step)
Additional parts
- Screw M3 L8 x2