Multiboard Pushfit Cylinder Peg (Multiple Dimensions plus 3mf file)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Cylindrical peg with a small Multiboard pushfit connector. Useful for hanging items that can spin.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A cylindrical peg with a small Multiboard pushfit connector. I have pre-generated various sizes however I've uploaded a .3mf if you need a custom size. Files are named with diameter x length measurements.
I've only tested the 10mm x 80mm variant however the other uploaded sizes should work fine.
I printed the 10mm x 80mm version in ABS at 260 degrees with a 110 degree heated bed however it should print fine in PLA and PETG.
Print it at a 45 degree tilt to improve strength, holding it steady at the base using painted on supports in the front and back of the Multiboard hex.
Took about 22mins to print including calibration steps.
I used mine for hanging whipper snipper / weed whacker cord.