2.13 inch eink epaper screen magnetic label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a housing component for the WeActStudio's 2.13in link labels, with magnets built in
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 2
- Wyświetlenia
- 707
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a housing component for WeActStudio's 2.13in link labels, available on AliExpress. The front piece has a cutout for just the link portion of the screen, while the back piece has cutouts for pin access.
The back half has 2 cutouts, one for the vertical pins and one for the 4x2 header, and a smaller cut-out so the screen sits flush. The front piece has 4 very thin pegs to keep the screen in place, which is a press fit into the back piece, keeping the screen in place. If you want to remove the screen and the front piece, push on the cutouts at the back; it should come out without damaging the pins.
For flexibility, the 3mf file includes 3 different body designs:
- Has a pause mid-print for you to add your own 10mm x 2mm magnets
- No mid-print pause, instead it includes 2 spaces for you to glue your 10x2mm magnets
- No magnets in the design, allows you to glue the housing or add your own connection method