P
Printables
QT Py CH32V203 eInk / ePaper Daily Calendar Stand
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
Wyniki wyszukiwania: epaper
Liczymy pasujące modele…
P
Printables
4.2" 400x300 ePaper / eInk case
A simple case for the Good Display GDEY042T81 4.2" 400x300 ePaper
P
Printables
TRMNL / XIAO 7.5" ePaper picture frame for DIY Kit
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
P
Printables
Case for CrowPanel 2.13" Epaper
Snap-Fit Case for CrowPanel ESP32 E-Paper (2.13") A precision-engineered, two-part protective enclosure for the CrowPanel ESP32 E-Paper HMI 2.13-inch . This design features a "sandwich" structure with a dedicated main body and a secure…
P
Printables
E-paper 4.2" weact Pilot Dashboard weather station epaper
Epaper 4.2" Weact Pilot Dashboard weather station I understand my dashboard code and function may not be usable for you. But at least you may need my case parts. All the other parts have been bought from aliexpress and picked cheapest…
P
Printables
Notepaper holder
Holder for up to 100 mm x 100 mm (4" x 4") and pens/pencils up to Ø 10 mm (Ø 0.39"). Middle hole for easy access even when the paper is low and a heavy bottom so it doesn't tip over.
P
Printables
Minimal ePaper display stand for Waveshare 7.5" displays and Pi Zero
These displays are weird dimensions to frame, so I decided to 3D print a stand for it. Your display will slide in and there's a slot for the hardware attached to the middle of the left side of the display. There's a small attachment at…
P
Printables
Case for Waveshare Passive 2.7" ePaper Display
Small case for this nice display . It may be a little tight, I had to sand down the PCB by a few tenths of a millimeter all around. I replaced the spacers provided by Waveshare by plastic ones with M3 thread and used a nut to fix it. When…
P
Printables
Waveshare 7.5 inch ePaper case for DFRobot Firebeetle
This is a remix of " WaveShare 7.5" e-Paper case - symmetrical borders " by ASW. Charging can be done via USB port without opening the frame. Additionally, a tilted version is available. Update 2024_10_09: Added the forgotten…
P
Printables
Case For Pico-ePaper-2.13 (waveshare)
The model closes because it has a thigh fit. Layer height: Doesn't matter Infill: Also doesn't matter Material: I used pla but I don't know if you can't use other material
P
Printables
2,66" ePaper Tag Holder
Holder for a 2,66" ePaper Tag from Hanshow, Modell Stellar Pro-266R-N. But should also fit for other Tags in that size. In the thicker part you can include some magnets (but they need to be strong, otherwise it will not fix the holder…
P
Printables
QT Py CH32V203 eInk / ePaper Daily Calendar Stand
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
P
Printables
ePaper 2.13 Pi Pico 3xAA case
A housing for a Waveshare 2.13 inch ePaper Display HAT for the Raspberry Pi Pico W. The Pico attached to the ePaper fit in the case tightly and won't move around once the battery holder sits in place. It fits 3 type AA batteries which can…
P
Printables
Pwnagotchi case with 2.9" ePaper Display
Pwnagotchi Case with WeAct 2.9" ePaper Display "Sources" of the Model can be found on OnShape: https://cad.onshape.com/documents/172fee915b4cc3dc319ceb2f/w/33094c145713f3fa30397bbe/e/763a9c2fd96bd14b04fed502
P
Printables
ePaper Badge Holder 2.9inch
Simple ePaper case for 2.9 modules. The case has room for a magnetic badge holder, and the back can be removed for easy programming. STOP PRESS: I received my stick on magnets...if you install the plate inside, then there is not enough…
P
Printables
4.2" 400x300 ePaper / eInk case
A simple case for the Good Display GDEY042T81 4.2" 400x300 ePaper
P
Printables
Flash Adapter for SoluM ST-GR2900N / GR29000 ePaper Tags
Flash Adapter for SoluM ST-GR2900N / GR29000 ePaper Tags See the writeup on my Blog.
P
Printables
Nemo-De-Beun: Epaper Access Point Case
Nemo-De-Beun: Epaper Access Point Case Disclaimer: this project is experimental! Made in BambuStudios itself, adding negative spaces to a squarebox. Printed with an X1C, 0.4mm nozzle on the 0.2mm mode.
P
Printables
WeAct 1.54'' ePaper desk clock with discreet lighting / WeAct 1,54'' eInk hodiny na stůl s nočním nerušícím osvětlením
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Desk clock with ePaper display with discreet lighting and automatic time synchronization over WIFI. You need to print at least the front part and the…
P
Printables
2.13 inch eink epaper screen magnetic label
This is a housing component for WeActStudio's 2.13in link labels, available on AliExpress . The front piece has a cutout for just the link portion of the screen, while the back piece has cutouts for pin access. The back half has 2…
P
Printables
3D Enclosure for Seeed Studio XIAO 7.5'' ePaper Panel
This is the 3D-printed enclsoure with a versatile retractable stand for the XIAO 7.5‘’ ePaper Panel, which is a energy-efficient smart home companion designed to seamlessly integrate with Home Assistant. Ideal for showcasing real-time…
P
Printables
Quarter Sheet Notepaper Holder
Holds quarter sheets of paper for notes, with stick-pen holder Category: Office
P
Printables
Lilygo T5 4.7 epaper display case
I needed a case for my e-ink weather display project using a Lilygo T5 4.7" ESP32+Epaper and wasn't satisfied with the ones I found online so I made my own. Main features: single (reset) button integrated to the frame optional back cover…
P
Printables
WeAct 2.9" ePaper Case with USB-C hole at the bottom
Remixed low profile case for 2.9" WeAct ePaper displays sold on AliExpress, with hole at the bottom, for USB-C port (and not at the back, like the original model). Also slightly thicker than the original model It fits inside the display…
P
Printables
4.2" ePaper Display Stand/Frame adapted for ESP32-DevKitC-1
Original stand and front cover still fit, please get the originals there, or use the ones also in the 3mf i widened the usb hole (my usb port was on the side, not the middle) Now the board is flippable. And i adjusted the bar to fit the…
P
Printables
3D Model for ePaper Driver Board for Seeed Studio XIAO
The ePaper driver board features a 24-pin FPC connector, a built-in charging IC for efficient and safe battery charging, and a JST 2-pin BAT connector for easy battery connection. It is ideal for creating WiFi-enabled digital photo…
P
Printables
ePaper Breakout Board for Seeed Studio XIAO
This ePaper Breakout Board is designed for SeeedStudio XIAO series boards for allowing you driving ePaper display seamlessly. It also comes with a 8-pin 2.54 header for supporting additional microcontroll connections. Supporting plug and…
P
Printables
Mobile 12x Smart Home button panel with ePaper display
Mobile 12x smart home button panel with ePaper display. A mobile 1-click solution to smart home automation! Do you want so set your smart home lights, blinds, devices or work status to ”Home Office“-mode, or “Work Office”-mode with 1…
P
Printables
School Timetable with ePaper display
School Timetable with ePaper display. Super easy setup. No soldering, no coding required. =) Functions Very easy to print and to setup device. Just plug all parts together and it is useable. =) WaveShare ESP32 powered 7.5” ePaper display…
P
Printables
WeAct 4.2" Epaper case - WeMos D1 mini
Wall-mounted case for WeAct 4.2" Epaper Module. Based off this 4.2" stand by napalmz and adjusted for WeAct module in place of Waveshare one. This model should fit WeMos D1 mini (ish?) ESP8266 board fairly tight. Pictured is a generic…
P
Printables
ePaper Weather & Video
This is a battery-powered frame for a 7.5" epaper display. I am using this for my ePaper Weather & Very Slow Home Video Player project . It can be hung on a wall, or use the included stand in landscape orientation. Use the rocker switch…
P
Printables
Waveshare 7.5 inch ePaper/e-Ink Display Frame Stand with Raspberry Pi Zero 2 W Mount
I was looking for a minimal and modern stand for the Waveshare 7.5" and found @Weaponsmith 's nice design. Cleaned up the model a bit and updated to hold a pi zero.
P
Printables
TRMNL / XIAO 7.5" ePaper picture frame for DIY Kit
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
P
Printables
4.2" 400x300 ePaper / eInk weather station
Housing for a 4.2" 400x300 eink screen as a weather station. The screen used is WeActStudio 3 color. The whole thing is based on the esp32 dev module.
P
Printables
ePaper/eInk display backplate for IKEA Hovsta / Waveshare 10.3"
⚠ I only tested this with a single frame, I'm not sure if Ikea places the mounts exactly like this every time!
P
Printables
Stratux Case with Display Case 3.7 epaper
New version with 15 pin Sub-D cable Category: Electronics
P
Printables
Box for ePaper + ESP32 Information Display
This is an enclosure for a 4.2" Waveshare ePaper display module. I've connected the module to an ESP32 and it displays a bunch of information above my desk. I put a rough guide to putting one of these together up on my blog. Print…
P
Printables
Modified Backplate for TRMNL / XIAO 7.5" ePaper picture frame for DIY Kit
This modified backplate is designed to improve usability and everyday handling of the TRMNL / XIAO 7.5” ePaper picture frame DIY kit. The modification allows full access to the control buttons and the Inkpad charging port without the need…
P
Printables
ESP32 1.54" Epaper display mini Macintosh case
Case for fitting an ESP32 C3 mini and a WeAct 1.54" epaper display for making a simple monitor that shows time, cpu and ram usage. No screws or extras needed. Github: https://github.com/konLiogka/esp32-system-monitor/tree/main
P
Printables
Case epaper 7 inch 640x384px
Case for a 7-inch eInk ePaper display. 640x384px. Any print settings. I used layer 0.2, nozzle 0.4, infill 15%, mounting holes for 2mm screws, 3-6mm long. hole for USB C socket 10mm
P
Printables
Trmnl stand waveshare epaper display + waveshare epaper driver board
TRMNL Desktop Stand – Waveshare 7.5" E-Paper Display This TRMNL desktop stand is a sleek, low-profile enclosure designed to display a Waveshare 7.5" e-paper screen at a comfortable viewing angle. It securely houses the Waveshare e-paper…
P
Printables
Case for CrowPanel 2.13" Epaper
Snap-Fit Case for CrowPanel ESP32 E-Paper (2.13") A precision-engineered, two-part protective enclosure for the CrowPanel ESP32 E-Paper HMI 2.13-inch . This design features a "sandwich" structure with a dedicated main body and a secure…
P
Printables
Waveshare 4.2 epaper / eink case
A case for the 4.2-inch Waveshare Paper screen. The display is using Home Assistant to update the data every five minutes, in this case, data from a Weather Flow Tempest station as well as local rain gauge readings using the Environment…
P
Printables
E-paper 4.2" weact Pilot Dashboard weather station epaper
Epaper 4.2" Weact Pilot Dashboard weather station I understand my dashboard code and function may not be usable for you. But at least you may need my case parts. All the other parts have been bought from aliexpress and picked cheapest…
P
Printables
Epaper beer font label
Labels for your home brew taps that fit 33mm diameter tap spouts and fit a 2.9 inch ePaper screen. I used the 2.9 inch display from Gicisky - https://www.aliexpress.com/item/1005002399342939.html?gatewayAdapt=kor2glo And using the Gicisky…
P
Printables
Waveshare 2.9" ePaper Desk Frame | Raspberry Pi Pico (2)
An open frame designed to house a Waveshare 2.9-inch e-Paper display module together with a Raspberry Pi Pico (2) and an indicator LED. Ideal for home automation projects like a trash collection reminder. Bill of Materials Waveshare 2.9…
P
Printables
Standing Case for Raspberry Pi Zero and Waveshare 2.7 ePaper Hat
I was unable to find a portrait oriented case for the Waveshare 2.7 inch ePaper display, everything I found was landscape oriented so I decided to create one myself. I also wanted access to the memory card without taking the case apart so…
P
Printables
ePaper name tag
ePaper display name tag with a 2.9" eInk display in offline mode held by 4 strong magnets to your clothing This case for a WaveShare 2.9" ePaper display comes with a small code to set 2 lines of text to it. With this code it can be used…
P
Printables
Case for TTGO T5 ESP32 epaper
A simple housing for LILYGO® TTGO T5 V2.0 WiFi Wireless Module bluetooth ESP32 2.13 e-Paper Display Development Board…
P
Printables
Kindle stand for Voyager / Whitepaper and 5th gen
Inspired by https://www.thingiverse.com/thing:1140638 - designed from scratch in Tinkercad to fit my own Kindle Voyager as snuggly as I could. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm…
P
Printables
2.9" ePaper case for ESP32 and battery
Update 2019-01-08: Just before printing this myself, I changed the design of the screen mount from screw holes, to a 'shelf' because the screw heads prevented the lid from sitting close enough. I didn't realise that the flex cable on the…
P
Printables
Modified Front: Weather Stand - 4.2" ePaper Waveshare Display - Lolin ESP32
Remix of the Case Cover to custom fit my desk shelf and provide some angle. 70 degree layed back orientation for better viewing, simply replaces the front of the OG design by Rafal Ko. (https://www.thingiverse.com/thing:5157668/files)
P
Printables
Frame for Adafruit 2.9" Grayscale eInk / ePaper Display FeatherWing
The mounting feet of the board need to be cut off for the board to fit into the frame.
P
Printables
2.9" ePaper knob
ePaper display knob with a 2.9" eInk display in offline mode → no power needed. This knob-case for a WaveShare 2.9" ePaper display comes with a small code to set 2 lines of text to it. With this code it can be used in offline mode as…
P
Printables
Adafruit 2.13" ePaper Display Stand
Hide all the circuits behind this sleek display stand for an Adafruit 2.13" eInk / ePaper Display FeatherWing . Definitely recommend printing with supports. Attach your FeatherWing behind the stand with some nylon M2.5 Thread screws . You…
P
Printables
Spacious Enclosure for Pimoroni Inky wHAT (ePaper/eInk) and Raspberry Pi Zero
Remix to remove logo from the frame and add spacious back cover since no back cover is provided anymore and the designs shown in the original are very thin and hard to work with. This is not a polished remix in any way, but is functional.…
P
Printables
ePaperStand18650
Holder/stand for e-paper price tag with integrated holder for aLi-Ion 18650 battery More info about project at https://www.klosko.net/blog/=clanek=epaper-samsung-solum4-2 (In CZECH) PCB with LDO :…
P
Printables
ePaperStand
Siple stand for Samsung/SoluM4.2 e-paper price tag Project page: https://www.klosko.net/blog/=clanek=epaper-samsung-solum4-2 (CZE)
P
Printables
Waveshare 7.5 inch ePaper/EInk Display frame holder with raspberry pi 3/4 mount
Link to e-ink display: https://amzn.to/4080FCH Link to really good project for using the e-ink display: https://github.com/mendhak/waveshare-epaper-display This design has a relief area below the display so it can stand straight and not…
P
Printables
Case for LilyGO 7.5" ePaper Display + LilyGO ESP32 T5 v2.4.1
(My display was cracked while testing an earlier version of this case with tighter tolerances - the current models don't have this issue. I have a replacement on the way but it'll be another month before it arrives. ) Designed with…
P
Printables
Lilygo T5 4.7"Plus ESP32+Epaper Housing
Simple housing for the newer Lilygo T5 4.7" Plus Model. The Buttons and connectors are at different locations on this one.
P
Printables
ePaper Price Display Adapter
Adapter for the e-paper price tag to put on display in fridge in our hackerspace TkkrLab. Created by Mark Lendering Original on : https://github.com/TkkrLab/PriceDisplayAdapter
P
Printables
Notepaper holder
Holder for up to 100 mm x 100 mm (4" x 4") and pens/pencils up to Ø 10 mm (Ø 0.39"). Middle hole for easy access even when the paper is low and a heavy bottom so it doesn't tip over.
P
Printables
Wastepaper basket with holder for cupboard doors /Papierkorb mit Halter für Schranktüren
Wastepaper basket with holder for cupboard doors
P
Printables
Ahoy AhoyDTU / DTU OpenDTU & waveshare 1.5" ePaper
I didn't find anything fitting my use-case, so I took the excellent https://www.printables.com/model/427556-ahoydtu-gehause-case-dtu-ahoy-opendtu and https://www.thingiverse.com/thing:4738646 to combine into the above and give enough…
P
Printables
Use Toiletpaper as Tissuepaper-Dispenser onehanded
Why use toiletpaper instead of Tissues? cheaper more sustainable (smaller in size per sheet) flushable conveniant because tp is always at home How to set up: in the future i maybe add a parametric version. Print both parts (customize or…
P
Printables
AhoyDTU Case with ePaper Display
This is an enclosure for an AhoyDTU with ESP-WROOM-32 board and Ebyte E01-ML01DP5 transmitter. Since I couldn't find a case for my AhoyDTU with ePaper display that I liked, I designed this case. I was inspired by the case of…
P
Printables
Parametric CR2450 Coin Cell Battery Holder (ePaper Tags)
Had a lot of CR2450 batteries from my ePaper tags that needed a temporary home This is a parametric OpenSCAD model - chose your size! update 2024-12: I renamed the model: it's of course for type 2450 coin cells (not 2405). Duh!
P
Printables
Lilygo TTGO T5S 2.9" ESP32 ePaper Board Case
Snap-together case (no hardware) for this board. Features a window for ePaper display, switch, USB port, and detents for the boards 4 buttons. http://www.lilygo.cn/prod_view.aspx?TypeId=50031&Id=1169&FId=t3:50031:3 My Github repo for…
P
Printables
Rámeček pro ePaper 7.5" Waveshare i Good Display - v1
Pozor - existuje druhá verze tohoto modelu, kde není potřeba tavná pistole ale “jen” se šroubuje: https://www.printables.com/model/546762/ V jednoduchosti je síla - do rámečku dostanete ePaper (e-Ink) od Waveshare i Good display s…
P
Printables
Rámeček pro ePaper 7.5" Waveshare i Good Display - v2 bez lepení
Do rámečku dostanete ePaper (e-Ink) od Waveshare i Good display s úhlopříčkou 7.5" (170.2x111.2x1.25). Tištěno bez podpěr, 0.15 mm na vrstvu (QUALITY). Záda k přední části přišroubujte šrouby M2.2x5 (otvory jsou M2), stejně tak vývojovou…
P
Printables
Rámeček na stůl pro ePaper 4.2" Waveshare i Good Display
5. 11. 2023 - Přidaná verze pro nový LáskaKit ESPInk 2.5 Do rámečku dostanete ePaper (e-Ink) od Waveshare i Good display s úhlopříčkou 4.2" (91x77x1.18 mm - případně lehce tlustší). Tištěno bez podpěr, 0.15 mm na vrstvu (QUALITY). Záda k…
P
Printables
Simple frame for 7.5" epaper display.
This frame is designed to be easy to print and use. It has a print-in-place hinge for the foot, which supports the frame, but it can also be hung on the wall, either in a vertical or horizontal position. I designed it in Fusion 360. I can…
P
Printables
HEMA notepaper holder
A holder for notepaper from HEMA. HEMA is a dutch chain that sells stationary, among other things. The paper sheets are 90x90 mm, the inside dimensions of the holder are 92x92mm.
P
Printables
Universal epaper display holder for mounting in flat surfaces
Very simple part to be printed with supports in “build plate only” Will work for many displays but original size is for parallel 9.7" 1200x825 You can adapt it just opening the .blender file Check Valentin Roland epaper controller in my…
P
Printables
10.1 DES epaper display enclosure with epdiy v7 controller
Hardware required: 10.1 display fabricated by http://en.wf-tech.com sold by Good-Display dot com epdiy v7 parallel epaper controller (branch s3_lcd uses 40 pin, 16 bit connector) Any LiPo 3.7V battery Print base with supports, top part…
P
Printables
ePaper screen + Pi Zero Enclosure
ePaper Screen enclosure and Raspberry Pi Zero holder. Parts List: Tri color Waveshare 1.9 inch e-Paper Module. (e.g. https://www.amazon.com/gp/product/B07P8LGGC7/ 20.99 USD ) Raspberry Pi Zero with headers ( 20.95 USD -…
P
Printables
4.2" ePaper frame with space for a large battery
I really like MultiTricker's work and a project called zivyobraz.eu . But for my 4.2" ePaper display I only had a 5000 mAh battery lying around. So I used my trusty onShape and I redesigned original frame a "little". :) And while I was…
P
Printables
7.5" ePaper frame with angled base
I really like MultiTricker's work and a project called zivyobraz.eu . But I wanted to put the display on a table and use it instead of a weather station. So I used my trusty onShape and I redesigned original frame a "little". :) The base…
P
Printables
4.2" ePaper Display Stand - D1 Mini ESP8266 & ESP32 Compatible
Remixed from original version. Here's the modifications: Taller version Ventilation grilles (ESP32 is hotter) Removed holes in the back panel (so no more stand) Create a D1 Mini ESP32 version (larger board) Print Settings Printer:…
P
Printables
7.5" ePaper frame printable on A1 Mini (side <= 180mm)
Print with 0.2 mm layer height, supports are needed only for the hinges. It holds together with the snap fit prongs, but it can alternatively be glued together using a glue gun if needed (for me it wasn't needed, the snap fit holds really…
P
Printables
Waveshare Epaper Picture Frame
Introduction This project uses displays a image on an e-paper picture frame. The picture switches once per day or controlled by the user. Included are the list of materials and how to build it. Knowledge Assumptions I am assuming in this…
P
Printables
Lilygo T5-4.7 Inch ePaper Case
Case for the Lilygo T5 4.7 Inch e-Paper V2.3 without 18650 LI-ION Battery. Thinner overall than other models.
P
Printables
Simple frame for 7.5" epaper display - ESPink
This is a remix of my display frame for the ESPink board.
P
Printables
ESP32 Waveshare 2.9 inch pico ePaper display
A simple display for the waveshare 2.9 inch pico epaper connected to a ESP32 (30 pin) with DHT22 temp/humidity sensor. Display I used: https://www.waveshare.com/pico-epaper-2.9.htm (Even when not connected to a pico I found it convenient…
P
Printables
2U 19 inch rack front panel mount for 3.7 inch epaper and raspberry pi zero
2U 19 inch rack front panel mount for 3.7 inch e-paper and raspberry pi zero These panel mounts require the DAP 2U MP-1 bracket. parts used: 3.7 inch e-Paper HAT Ethernet / USB HUB HAT Raspberry Pi Zero W Print the front panel mount on…
P
Printables
ePaper Display Stand 4.2" Waveshare
This is a remix from https://www.thingiverse.com/thing:5157668
P
Printables
Minimal ePaper display stand for Waveshare 7.5" displays and Pi Zero
These displays are weird dimensions to frame, so I decided to 3D print a stand for it. Your display will slide in and there's a slot for the hardware attached to the middle of the left side of the display. There's a small attachment at…
P
Printables
SKADIS 2.9 Inch (2.9" ) epaper display/tag holder
A holder for a 2.9 Inch epaper display. These tags can be used at home to display information from a home automation solution. For example Home Assistant. More info on that in this thread: Anyone looked into using Electronic Price Tag…
P
Printables
Rámeček pro ePaper 5.65" Good Display GDEP0565D90
Potřeboval jsem někam umístit jeden 5.65" displej, tak jsem pro něj vytvořil jednoduchý rámeček podobný tomu, co mám pro 4.2" modely. Seznam součástek: Good Display GDEP0565D90 5.65" 600x448 LaskaKit ESPink ESP32 e-Paper LaskaKit SHT40…
P
Printables
WeAct 2.9" ePaper Case
This is a low profile case for the 2.9" WeAct ePaper displays sold on aliexpress . It features retaining pins to hold the display in the correct position, and a snap-fit mechanism to hold the case together. The cable is routed out the…
P
Printables
Holder for 1.54" EPaper tag (OpenEPaperLink)
Easy to print stand/holder for EPaper tag (about 14 mins) ST-GR16000. Read more about OpenEPaperLink here: https://github.com/jjwbruijn/OpenEPaperLink
P
Printables
IKEA Skadis (SKÅDIS) hook for ePaper frame
Poté co jsem vytiskl 5 různých zdánlivě pasujících háčků pro Skadis na které bych rámeček s ePaperem zkusil zavěsit jsem zjistil, že ďábel je v detailu a udělal jednoduchý funkční návrh. Tisknul jsem z PLA a dal 4 perimetry, takže už…
P
Printables
Rámeček pro ePaper 10.2" Good Display a LáskaKit ESPInk
Rámeček vytvořený pro ePaper (e-Ink) od Good Display 10.2", konkrétně model GDEM102T91, ale pravděpodobně se vejdou i ostatní ePapery této úhlopříčky (vnější rozměr ePaperu včetně plochy okolo displeje je 224 x 157 x 1.0 mm). Pro uchycení…
P
Printables
4.2" ePaper frame for a large battery and with back lid
Do not forget to print ePaper-4.2-BigBattery-back from original source it is not included here. Required materiel 1x M3x6 Hex flat head screw (or longer if it doesn't interfere with battery) 1x M3 hexnut 1x ePaper-4.2-BigBattery-back from…
P
Printables
Case for Waveshare Passive 2.7" ePaper Display
Small case for this nice display . It may be a little tight, I had to sand down the PCB by a few tenths of a millimeter all around. I replaced the spacers provided by Waveshare by plastic ones with M3 thread and used a nut to fix it. When…