Standing Case for Raspberry Pi Zero and Waveshare 2.7 ePaper Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was unable to find a portrait oriented case for the Waveshare 2.7 inch ePaper display, everything I found was…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I was unable to find a portrait oriented case for the Waveshare 2.7 inch ePaper display, everything I found was landscape oriented so I decided to create one myself.
I also wanted access to the memory card without taking the case apart so I decided to add an opening at the bottom of the case to allow easy access to it.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: esun PETG Black
Notes:
Supports only touching build plate
Required cleaning up supports
How I Designed This
- Imported the original stl into Tinkercad
- Rotated the case 15 degrees backwards to enable easy reading
- Added a base to support the case
- Added an opening to allow access to the memory cars
Category: Electronics