AhoyDTU Case with ePaper Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure for an AhoyDTU with an ePaper Display, ESP-WROOM-32 board and Ebyte E01-ML01DP5 transmitter.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 58
- Wydruki
- 2
- Wyświetlenia
- 906
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an enclosure for an AhoyDTU with ESP-WROOM-32 board and Ebyte E01-ML01DP5 transmitter.
Since I couldn't find a case for my AhoyDTU with ePaper display that I liked, I designed this case. I was inspired by the case of @andred_797657
The advantage of this case is that all parts are screwed or plugged in, no hot glue is needed.
Changelog:
- 17.05.2023: new Version v2 / without screws on the front and new display bracket
- 16.05.2023: first Version v1
I used the following components:
- diymore ESP-WROOM-32 with USB Type C
- EBYTE 2,4 GHz Wireless Module nRF24L01 (E01-ML01DP5)
- Waveshare 200x200, 1.54inch E-Ink display module 2 Color (Black/White) - SKU: 12955 (v2.1)
- Delock WLAN 802.11 b/g/n Antenna 12624
- 8x Thread insert M3 (4x v1)
- 4x M3x3 Screws (Display, only V2) + 8x M3x8 Screws (Back + v2: Display bracket)
The enclosure can be printed completely without support.
To do this, the display opening must be placed on the print bed.