1 / 3
10.1 DES epaper display enclosure with epdiy v7 controller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ever though about making a nice frame with a full color display? Well this is my take to make it happen using epdiy
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Hardware required:
- 10.1 display fabricated by http://en.wf-tech.com sold by Good-Display dot com
- epdiy v7 parallel epaper controller (branch s3_lcd uses 40 pin, 16 bit connector)
- Any LiPo 3.7V battery
Print base with supports, top part without supports.
Use Blender for custom modifications.
Buy one controller board if you like the project. Note: 10.1 DES will be available after some months. Contacted Wuxi factory and they never replied, probably never will, since they are not interested in selling to makers and probably you can buy only through a reseller.