Case for Waveshare Passive 2.7" ePaper Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a housing for the 2.7inch Passive NFC-Powered E-Paper Module - Case, rear wall and small plates.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Small case for this nice display.
It may be a little tight, I had to sand down the PCB by a few tenths of a millimeter all around. I replaced the spacers provided by Waveshare by plastic ones with M3 thread and used a nut to fix it. When mounting the display you might need to bend the case side to get it into. Rear side is simply pushed in.
Works for me; next time I would add some space around the display (to avoid sanding), add 2-3mm in height and width (for more easy mounting) and create the small mounting plates with rounded corners.