Case for Waveshare Passive 2.7" ePaper Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a housing for the 2.7inch Passive NFC-Powered E-Paper Module - Case, rear wall and small plates.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 595
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Small case for this nice display.
It may be a little tight, I had to sand down the PCB by a few tenths of a millimeter all around. I replaced the spacers provided by Waveshare by plastic ones with M3 thread and used a nut to fix it. When mounting the display you might need to bend the case side to get it into. Rear side is simply pushed in.
Works for me; next time I would add some space around the display (to avoid sanding), add 2-3mm in height and width (for more easy mounting) and create the small mounting plates with rounded corners.