1 / 3
Suzuki GSX - 8 License Plate Light For Yoshimura Tail Tidy — zdjęcie 1
1 / 3

Suzuki GSX - 8 License Plate Light For Yoshimura Tail Tidy

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

License plate light replacement for the Yoshimura GSX-8 tail tidy

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
318
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Uploaded this for Haavix on reddit- this is a license plate light meant to replace the taillight attachment on the Yoshimura tail tidy for the GSX-8. This is a little involved and a really specific use case but since they asked I might as well upload it.

Notes: 

  • Though it obviously fits perfectly, I didn't originally mean to upload this so some of the stuff like bolt holes might need to be cleaned up with a drill to get the bolts to pass through cleanly. 
  • On mine, I weather sealed it with medium CA glue on the seams. It has survived a couple washes without shorting so I think it works fine.
  • I used PETG filament, and clear PETG filament for the lens, though if you have trouble printing the clear lens well, the slot where it attaches is a rectangle so you can probably find a piece of polycarbonate or something like that to stick there instead.
  • Here's the cheap lights I pulled the LED board from, but any 12v white LED strip should work: https://www.amazon.ca/dp/B09TW7FBTZ
  • These are the stainless bolts I used, I used the washers and lock nuts that came with the Yoshi tidy, but any stainless lock nuts and washers should be fine.: https://www.amazon.ca/dp/B0CJB68QBP

Tagi