1 / 3
Suzuki GSX - 8 License Plate Light For Yoshimura Tail Tidy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
License plate light replacement for the Yoshimura GSX-8 tail tidy
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Uploaded this for Haavix on reddit- this is a license plate light meant to replace the taillight attachment on the Yoshimura tail tidy for the GSX-8. This is a little involved and a really specific use case but since they asked I might as well upload it.
Notes:
- Though it obviously fits perfectly, I didn't originally mean to upload this so some of the stuff like bolt holes might need to be cleaned up with a drill to get the bolts to pass through cleanly.
- On mine, I weather sealed it with medium CA glue on the seams. It has survived a couple washes without shorting so I think it works fine.
- I used PETG filament, and clear PETG filament for the lens, though if you have trouble printing the clear lens well, the slot where it attaches is a rectangle so you can probably find a piece of polycarbonate or something like that to stick there instead.
- Here's the cheap lights I pulled the LED board from, but any 12v white LED strip should work: https://www.amazon.ca/dp/B09TW7FBTZ
- These are the stainless bolts I used, I used the washers and lock nuts that came with the Yoshi tidy, but any stainless lock nuts and washers should be fine.: https://www.amazon.ca/dp/B0CJB68QBP