Protective DJI 04 air lite canopy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protective canopy for the dji 04 air unit.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
A protective canopy for the dji 04 air unit. The front and sides of the canopy have a large air gap built in, should take a solid beating. This is tricky to print. I recommend printing with a layer height of 0.2mm and 2 to 1 walls, and no infill. If possible try printing 1 wall with a thickness of 0.6mm, 0.42 still works but make sure your printer is well calibrated.
There are 2 version, with and without a fin. Use no fin for additional weight savings. the canopy opens like a snake's mouth to allow the cam to be slipped in and close to lock the cam in place. Including the wire.
Next iteration will have a way to mount nd filters, stay tuned.
I can create additional angles if asked for them.