1 / 6
Remix of AD5X Waste Chute
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Amended to be printable in one piece, added bits too.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 493
- Wydruki
- 2
- Wyświetlenia
- 5522
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (78)Powiązane
This could do with someone a bit better than me working the angles so that each piece finds the collection vessel, at the moment the flat spot on the corner is a collection point until it's sufficiently full to continue it's journey.
I've added a second print which is an insert to help the poop slide all the way to the collector. It works without it but you get a pile before it starts to poop. I created the insert because I wanted to use the model I'd already printed and magnetted.
