M6 Hex Cage Nut Holder/Adpater for Server/Networking Rack Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cage nut adpater to use M6 hex bolts as cage nuts
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 725
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
M6 Hex Cage Nut Holder/Adpater
Fits a M6 hex nut to use as a cage bolt, other models didn't suit my rails for some reason (these rails https://surplustronics.co.nz/products/10899-rack-strip-single-angle-16u-black) so I made my own verison.
Prints nicely with no supports needed due to the sloped inside. These work fine for holding things on my 10" rack, but would probably use proper cage nuts for a 19" rack or very heavy items. I'm using them these as I was a few cage nuts short of what I needed for my project and didn't want to buy any more.
See dimensions below, you can always edit the .f3d fusion file or just scale it in your slicer if it doesn't quite fit.
